CarloPHLV2Online
Following: 1Followers: 0
Forums/ Controllers
a week ago
Re:EAP225-Outdoor keeps getting disconnected
Hello @SylwesterG and also to those who are following and would be reading this thread in the future. I found a new firmware from TP-Link's website for EAP225-Outdoor(US)_V3 which was released last...
0HELPFULS
Forums/ Switches
a week ago
Re:SG2005P-PD does not boot up when PoE device is plugged
Clive_A wrote Let me forward this to the test team and see how they respond to this behavior. Will update you once I get a reply. @Clive_A , Thanks for helping
0HELPFULS
Forums/ Switches
a week ago
Re:SG2005P-PD does not boot up when PoE device is plugged
D-C wrote @CarloPH, seems the issue is isolated to the SG2005P-PD. Not sure there's much else to do other then try a replacement. @D-C, thanks for taking your precious time in helping me out. Truly...
0HELPFULS
Forums/ Switches
2 weeks ago
Re:SG2005P-PD does not boot up when PoE device is plugged
D-C wrote Sorry @CarloPH, I did indeed miss those details. 🤦♂️Could the TL-POE170S be bad? Does the SG2008P have 30W surplus to power the SG2005P-PD with one camera and bypass the TL-POE170S for a...
0HELPFULS
Forums/ Switches
2 weeks ago
Re:SG2005P-PD does not boot up when PoE device is plugged
Clive_A wrote Hi @CarloPH Thanks for posting in our business forum. CarloPH wrote Yes. Tried all scenarios in changing cables with the same results. Verified that the cables used are up to standards...
0HELPFULS
Forums/ Switches
2 weeks ago
Re:SG2005P-PD does not boot up when PoE device is plugged
Yes. Tried all scenarios in changing cables with the same results. Verified that the cables used are up to standards as well.
0HELPFULS