DSL Modem Routers
Solution'Authentication failed, Server TLS version is too low' appears when connecting OpenVPN of DSL Modem
This Article Applies to: Archer VR2100 V1, VR2100v V1, VR600 V3, VR400 V3, VR2800 V1 Issue Description: After updating the OpenVPN client version, some users might be unable to connect to the OpenVPN
VPNOfficial
40Helpful
17007Views
TroubleshootingVoIP will not connect on TP-Link modem router? Check this.
Some customers may encounter an issue when setting up the VoIP service on the TP-Link VoIP modem routers. Refer to this article to troubleshoot first on your own before reaching out to a tech support
VoIPInstallationHighlighted ThreadOfficial
8Helpful
15498Views
This Article Applies to: Archer VX1800v V1 Phenomenon Description: When connecting the Archer VX1800v to Sky Broadband (UK) or NowTV MER line and configuring it through the web interface, the "Sky(MER
Network ConnectivityOfficial
14Helpful
1569Views
TroubleshootingNo internet service after quick setup
Hi All, Occasional there is some feedback that there is no internet service after quick set-up. Since most of our DSL modem routers, such as VR400/VR600/VR2100, etc. support multiple working modes, we
Highlighted ThreadNBN ConfigurationOfficial
6Helpful
11170Views
hi i have same problem with modem archer vr400 v3. https://community.tp-link.com/en/home/forum/topic/271574?page=1 it have 2 hidden wifi network (2.4 GHz and 5 GHz) When will the new version of the pr
Highlighted ThreadOneMeshOfficial
50Helpful
11470Views
Is there any plans to add Ethernet backhaul easymesh option to vx1800v modem/router? Currently it has only wireless option. I want to add another router as satellite to vx1800v via Ethernet. If there
Firmware UpdateEasymesh
By
szgbsr
0Helpful
9Views
Does everyone else have the same trouble getting customer support? I've got a new VR400 - Having trouble with connecting what should be a simple play&play set-up. Absolutely ridiculous!!!!!
1Helpful
23Views
Hi, I have an issue with my router, it is the second one that has done this, the first I just threw in the bin but I can't keep buying more each time the power goes off, basically it has been working
0Helpful
27Views
I have changed the primary and secondary DNS servers via the Tether app but it seems there are conflicting information within the web UI. The advanced page shows the correct DNS servers but the system
DNS
0Helpful
27Views
If I set a specific IPv4 for a specific MAC, DHCP will assign a completely different address from the DHCP range anyway. In addition, this device is not even visible in the overview. Neither the refre
Address ReservationDHCP
0Helpful
44Views