@Sunshine device model tl-mr3220, hw 2.0, the device is det on wireless router mode. I can connect to wireless with my computer from i configure tl-mr3220.the lan access is not possible, i cannot...

i have the tp link tl-mr3220 wireless router. my router has many problems. if i connect device on any the lan ports, i cannot ping this device. my laptop cannot receive ip address from the dhcp...

@gogi100 i have concluded that the configuration of my l3 switch is configured with trunking, so two ports on the l3 switch does not support the link aggregation of tp-sg1024de. can you give me some...

configuration trunk ports on the l3 switch is below interface port1.0.9-1.0.10 description VIII_Sprat switchport switchport mode trunk switchport trunk allowed vlan add 5-7,80-83 channel-group 5 mode...

@John1234 on my l3 switch is configured trunking for 2 ports that go to ports 1,2 on tp link.those ports on tp link must be trunked? I configured tp link switch but my configuration does not works

configuration 2 ports on l3 switch is: interface port1.0.9-1.0.10 description VIII_Sprat switchport switchport mode trunk switchport trunk allowed vlan add 5-7,80-83 channel-group 5 mode active...