@Dandalorian You can also try these things, all together: 1. Turn off 2.4GHz in Deco Main Network, to ensure laptop always uses faster and less congested 5GHz: 2. Find approximate middle point...

@tuli You should be able to do that, with Deco mesh running in Access Point mode. This is how I have it in my house. In very rare case, router may not support Deco Ethernet backhaul, but most do.

@ianreneb i would start with placing Satellite M9 Plus in the living room next to TV/virgin box, and hardwire them to Satellite Deco M9. If Satellite has good link to Main Deco from there, you'll...

@Miles80 When you run Deco mesh in Access Point mode, these options (LAN IP, DHCP Server, Address Reservation) are on ISP router, not in Deco app. You should have access to configuration Web pages of...

@ianreneb As an owner of two M9 Plus and two M5s, here are my recommendations. The best way is to make M9 Plus your Main Deco. Connect Satellite M9 Plus to Main M9 Plus and make sure Signal is good...

@nfsanton Open each Satellite Deco page in Deco app and check what it shows under "Connected to:", example: If you see both 2.4GHz and 5GHz bands, like in example, it means both Main and that...