Hi there

I do have the following setup.

Deco X60 master connects to Deco X60 satellite. Wifi is stable. Now I have plugged in the TP-Link SG105 from LAN port 1 into the Deco satellite. I have 4 devices which I connect to the switch. A Synology NAS, a TrendNet cam, a SNOM VoIP-phone and a Lenovo PC. Connection lights are flashing for all devices from port 2 to 5. Unfortunately from those 4 devices only the camera (sits on port 4) is shown on my Deco network, the other 3 devices are connected and active but do not become visible on my Deco network.

What I have tried so far:

- latest firmware on the system

- taking another cable for the switch / satellite connection

- changing the satellite port to connect to the switch 

- setting the switch several times on/off for loop prevention

- IPTV parameters are off

- restarting switch, satellite and the 3 missing devices several times

- plugging in the VoIP-phone directly into the satellite - no success

I am pretty much at the end of my ideas and wonder what a cheap camera can do better than the sophisticated and expensive Synology NAS to show up on my Deco network.

Any idea is welcome.   Thx Hans