Home Network Community > Wi-Fi Routers > BE800 As Main Router GE800 as mesh node
< Wi-Fi Routers

BE800 As Main Router GE800 as mesh node

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

BE800 As Main Router GE800 as mesh node

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
BE800 As Main Router GE800 as mesh node
BE800 As Main Router GE800 as mesh node
2024-05-01 17:31:31 - last edited 2024-08-15 06:37:26
Tags: #Feature Request #EasyMesh #Network Connectivity #EasyMesh Ethernet Backhaul
Model: Archer BE800   Archer GE800  
Hardware Version: V2
Firmware Version:

Question 1

BE800 As Main Router

GE800 as mesh node/ Ethernet Backhaul Mode to main router be800

ge800 how can i access management console, right now i have to use BE800  management

reason i need to access ge800 is because ge800 ap mode  cap speed  80mbps max

but if i connet to be800 by cable test can be over because my internet 1gbps
but if i connet to ge800 by cable test speed cap at 80mbps

i need to know why what setting do i need to do to unlock speed cap in ge800?

or do i need to use ge800 as main router?
-----------------------------------------------------------------------
Question 2

can both be800 as main router and ge800 as easymesh use they only management do i have to make ip addresss driffent for allow me to access both management mode console


-----------------------------------------------------------------------
Question 3 is

Archer Air R5 | AX3000 Dual-Band Wi-Fi 6 Air Router
any update for Ethernet Backhaul Mode/Backhaul Connection Priority..

this air r5 i feel useless if use easy mesh air connection next room cannot not detect

  0      
 
  0      
 
#1
Options
7 Reply
Re:BE800 As Main Router GE800 as mesh node
2024-05-01 18:47:36

  @be800 

 

Hi,

 

Regarding Question 1: 
Currently it is not possible to access the management console of TP-Link EasyMesh satellite routers. (only one particular model, the AX55 V1, supports this at present)

Also, there is no setting to unlock a speed cap of an EasyMesh satellite router, as there should be no speed cap in the first place.

 

Regarding Question 2: Refer to answer for Question 1.

 

Only someone from TP-Link could answer Question 3, but usually they do not give any ETAs for firmware and feature updates.
 

  2  
  2  
#2
Options
Re:BE800 As Main Router GE800 as mesh node
2024-05-01 19:10:19

  @woozle 

 

Besides, could you please go to the "EasyMesh" menu of the admin webpage of the main router (BE800), then click on the paper-with-pen icon next to the GE800's information and then report back whether the GE800 is indeed using Ethernet backhaul or perhaps wireless connection and also give us the "Link Speed(s)" shown?

 

  1  
  1  
#3
Options
Re:BE800 As Main Router GE800 as mesh node
2024-05-02 03:32:49 - last edited 2024-05-02 03:33:56

  @woozle 
ok but i mean is to access management web https192.168.0.1 both device  current i can access 192.168.0.1 is be800 only ge800 unable to access

  0  
  0  
#4
Options
Re:BE800 As Main Router GE800 as mesh node
2024-05-02 03:34:38 - last edited 2024-05-02 03:36:00

  @woozle also problem speed cap 100mbps only after i activated easymesh my ge800

 

  0  
  0  
#5
Options
Re:BE800 As Main Router GE800 as mesh node
2024-05-02 16:07:46

  @be800 

 

This speed cap is usually caused by the ethernet cable that you're using. Change the cable with another òne of a good quality and test if the speed cap has gone.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#6
Options
Re:BE800 As Main Router GE800 as mesh node
2024-05-02 21:27:50 - last edited 2024-05-02 21:28:46

be800 wrote

  @woozle 
ok but i mean is to access management web https192.168.0.1 both device  current i can access 192.168.0.1 is be800 only ge800 unable to access

  @be800 

 

As I indicated previously, when a TP-Link router becomes an EasyMesh satellite, then the access to its management webpage is blocked. This is done intentionally by TP-Link and it is currently the same on all retail routers made by TP-Link, with the exception of the Archer AX55 V1 running the latest firmware.

 

If you switch the BE800 and GE800 around (i.e. use GE800 as main and BE800 as satellite), then the BE800's webpage should become blocked.

  0  
  0  
#7
Options
Re:BE800 As Main Router GE800 as mesh node
2024-05-13 01:49:25 - last edited 2024-05-14 10:03:19

  @be800 

Hi, thanks for posting question on our community.

Now it does not support to log into the web interface of satellite router for most routers.

May I confirm what kind of Ethernet cable you are using to connect GE800 to BE800?  They were set up Easymesh Ethernet Backhaul,right?

What is hardware and firmware version of your BE800 and GE800? Is firmware updated to latest?

And did you test the speed on your computer via speedtest.net? If not, it is suggested to test the speed again via this method. And please share the model and OS of your computer.

 

Also, please check QoS and WAN Negotiation speed.

Thanks for your cooperation.
 

Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode.
  0  
  0  
#8
Options

Information

Helpful: 0

Views: 1028

Replies: 7

Tags

Feature Request EasyMesh Network Connectivity EasyMesh Ethernet Backhaul
Related Articles
EasyMesh Archer GE800 >> AX6000
101 0
 Easy Mesh Backhaul ethernet two BE800's
1684 0
BE800 --> BE550 Ethernet Backhaul
1017 0
BE800 to form Mesh with AX11000 and REX505
1008 0
 Archer BE800 as main router and Deco BE85 as mesh unit
729 0
 Mesh network - My 3rd node keeps connecting to the main node
1311 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.