MR600 v3 - Switzerland - 4G+ on and off

MR600 v3 - Switzerland - 4G+ on and off

71 Reply
Re:MR600 v3 - Switzerland - 4G+ on and off
2023-12-30 01:28:30

  @Sunshine It is funny that this is marked as solved, when it is not... Very frustrating...

  2  
  2  
#62
Options
Re:MR600 v3 - Switzerland - 4G+ on and off
2023-12-30 06:11:21

  @MobileRouter 

 

Hi.

the truth is that the router never had a problem....

It's running stable with CA on only when needed 

 

The only problem was the carrier because it's listed in official website to run the bands 1 3 and 7 but here locally the 7 band is replaced with band 20 

 

So every time that the router used band number 7 it stuck because of the empty response (I guess)

 

Since I replaced band 7 with band 20 everything is running smoothly

 

Meaning: in band selection I ticked 1+3+20 instead 1+3+7and left it as it is and that's all !

  0  
  0  
#63
Options
Re:MR600 v3 - Switzerland - 4G+ on and off
2024-01-03 20:34:26

  @Akaii 

 

The "truth" is a strong statement... In particular, I understand that this was your very first post (at least under this User Name), and it is entirely unclear where you are based, what version of the MR600 and what FW version you use, who is your ISP etc. Not very helpful.

If you have read the various reports by other users, the problem did not seem to exist on V2 with FW 1.6.xxx, and started to appear with a FW Update for V2, and with V3 with its initial (and currently only official) FW. Also, not sure what the purpose of the Automatic band selection then shd be, why to select 3 bands (and how does the MR600 then decide which of the bands to use for Cat 6 CA) etc....

Am still waiting for a solution from TPL...

  1  
  1  
#64
Options
Re:MR600 v3 - Switzerland - 4G+ on and off
2024-01-05 00:54:42

MobileRouter wrote

  @Akaii 

 

The "truth" is a strong statement... In particular, I understand that this was your very first post (at least under this User Name), and it is entirely unclear where you are based, what version of the MR600 and what FW version you use, who is your ISP etc. Not very helpful.

If you have read the various reports by other users, the problem did not seem to exist on V2 with FW 1.6.xxx, and started to appear with a FW Update for V2, and with V3 with its initial (and currently only official) FW. Also, not sure what the purpose of the Automatic band selection then shd be, why to select 3 bands (and how does the MR600 then decide which of the bands to use for Cat 6 CA) etc....

Am still waiting for a solution from TPL...

  @MobileRouter 

  0  
  0  
#65
Options
Re:MR600 v3 - Switzerland - 4G+ on and off
2024-01-07 16:04:02 - last edited 2024-03-14 18:15:17

  @Archer_8 

What are you trying to say? There is no text in your reply...

  0  
  0  
#66
Options
Re:MR600 v3 - Switzerland - 4G+ on and off
2024-02-05 21:38:04

Can someone check if the latest firmware version (MR600(EU)_V3_220727) fixes this issue?

  0  
  0  
#67
Options
Re:MR600 v3 - Switzerland - 4G+ on and off
2024-02-06 01:48:04

  @becks 

Thanks for flaging that there seems to be a new FW (even though the FW dated 2022?!). I will try it out when back next week and revert.

 

FYI only: my understanding of an email I received from TP Support Team in Asia is that they have given up (at least with regard to getting an updated modem FW incorporated (Snapdragon X12 from Qualcomm / Quectel)....

 

Best

  0  
  0  
#68
Options
Re:MR600 v3 - Switzerland - 4G+ on and off-Solution
2024-02-17 14:57:52 - last edited 2024-03-14 18:15:25

@Sunshine

I have now installed FW 1.1.0 0.9.1 v0001.0 Build 220727 Rel.74013n, but the problem of constantly (every 1-3 seconds) switching between 4G and 4G+ persists...

 

I have seen the private email from Maxwell of the TP-Link team re Qualcomm's response (also blaming the ISP/Carrier). However, I have still not received an answer to my question as to what specifically I shd ask the ISP/Carrier/Tower Operator to do (I have been asking for some guidance for some time). Would appreciate a response.

 

Thanks

Recommended Solution
  1  
  1  
#69
Options
Re:MR600 v3 - Switzerland - 4G+ on and off
2024-03-14 18:16:22

@Sunshine 

 

Any response, pls?

Thx

  0  
  0  
#70
Options
Re:MR600 v3 - Switzerland - 4G+ on and off
2024-03-15 02:17:54

  @MobileRouter 

 

Hi, I've tried to talk with the senior engineer, I am afraid you could only explain the phenomenon and analysis of the MR600 4G+ issue to the ISP, Based on previous debug log analysis, the device is functioning normally and the issue is related to the ISP or the base station.

 

By the way, since this kind of issue was reported by other users as well on this community, if ISP cannot help or confirm the issue. to follow up this kind of issue, XiaoMi phone will be needed for comparison because we found the way to capture modem logs on XiaoMi phone.

Your understanding will be highly appreciated!

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#71
Options