no signal

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

no signal

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
no signal
no signal
2022-08-22 04:55:55
Model: Archer MR600  
Hardware Version: V2
Firmware Version:

HI, when i reboot my router often there is not internet connection, i have to reboot till it works.

the firmware is updated, the sim is ok, nay ideas?

 

thank you

 LB

  0      
  0      
#1
Options
7 Reply
Re:no signal
2022-08-24 11:09:30

  @LukaB 

 

Hi, may I know who your ISP is?

After a reboot, if internet doesn't work, please send us screenshots of Advanced->Status page and Advanced->Network->Internet page along with a system log file.

 

In addition, when the problem happens, if you just unplug the SIM card and plug it back in, will it work again?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:no signal
2022-08-24 12:42:02

  @Sunshine hi

 

Thank your answer, i tried ti reinsert the sim ,but It still di not work, now the router works correctly ,next Time if It Will happen i Will sensi you thè files you  requested.

 

Thanks again,have a nice day

  0  
  0  
#3
Options
Re:no signal
2022-08-25 07:14:59

  @Sunshine 

 

this is my ISP:

 

21072301

 

thanks

 

luKaB

  0  
  0  
#4
Options
Re:no signal
2022-09-09 07:15:21

  @LukaB HI, it happened again , i send to you the screenshot.

 

 

now i unblocked again the sim ( it was already unblocked), i reboot and it works

 

thank you

 

LUKAB

  0  
  0  
#5
Options
Re:no signal
2022-09-13 10:21:14

  @LukaB 

 

Hi, thank you very much for the reply.

May I know if the problem happens on every reboot? or happens randomly?

 

Based on the screenshots, you selected several bands manually, please try to change the band back to Auto and check if the problem still happens, if so, you could also try to change Network Type from 4G Preferred to 4G only to see if it helps.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#6
Options
Re:no signal
2022-09-14 14:23:45 - last edited 2022-09-14 14:41:42

HI  @Sunshine , in the last few days it happened every reboot, i followed your advices, but nothing changed, it needs to reboot 3 times to get signal... really i don't know.

my sim card belongs to a MVNO a virtual operator, could that be one of the reasons this happens?

 

thanks a lot and sorry for my english

 

 

  0  
  0  
#7
Options
Re:no signal
2022-09-15 10:37:23

  @LukaB 

 

Hi, thank you very much for the reply.

MVNO should be able to connect automatically as well after a reboot, please change the band back to Auto, then change Network Search from Auto to Manual, it will search available networks, please select the carrier name that your SIM could work, then check if it helps.

 

However, if the problem still happens, please send email to "support.forum@tp-link.com" with this forum ID 578660, and provide us a screenshot of Advanced->Status page when it doesn't work after a reboot. Our engineer will follow up your case.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#8
Options