Solution Manual Band Selection for 4G Wi-Fi Routers and LTE Gateways
If you have experienced an issue of disconnecting or slowness on the 4G Wi-Fi router’s network due to the auto band selection, Please download and install the following beta firmware on the router to manually fix the band.
Please be sure you have read The Beta Test Agreement before proceeding!
| Archer MR600(EU) v2 | supported via the latest official firmware |
| Archer MR600(EU)_V1 | Archer_MR600(EU)_V1_220818 (Beta firmware) |
| Archer MR400(EU) V4.2 | supported via official firmware |
| Archer MR400(EU) V4 | Archer_MR400(EU)v4_20210408 (Beta firmware) |
| Archer MR400(EU) V2/V3 | LTE_GATEWAY_20200325 (Beta firmware) |
| Archer MR200(EU) V5.2 | supported via official firmware |
| Archer MR200(EU) V5 | ArcherMR200(EU)_V5_211015 (Beta firmware) |
| Archer MR200(EU)V3/V4 | LTE_GATEWAY_20200325 (Beta firmware) |
| TL-MR6500V(EU)V1 | supported via latest official firmware |
| TL-MR6400(EU) V5.2 | supported via latest official firmware |
| TL-MR6400(EU) V5 | TL-MR6400(EU)v5_20201113 (Beta firmware) |
| TL-MR6400(EU) V3/V4 | LTE_GATEWAY_20200325 (Beta firmware) |
| TL-MR6400(APAC) V3 | LTE_GATEWAY_20210129 (Beta firmware) |
| TL-MR150(EU)V2 | TL-MR150(EU)v2_20200930 (Beta firmware) |
| TL-MR150(EU)V1 | LTE_GATEWAY_20210108 (Beta firmware) |
| TL-MR100(EU)V1 | supported via the latest official firmware |
| M7450(EU) V2 | M7450(EU) _V2_20220303 (Beta firmware) |
| M7650(EU) V1.1 | M7650(EU)_V1.1_20220427 (Beta firmware) |
Note: For MR600 v1/v2, Please note that not all combinations of the 4G bands are supported in 4G+ mode. Only when the router and the SIM card support the same combinations of 4G band in 4G+ mode, the bands might be aggregated successfully.
Besides the beta firmware, it is also planned to release the official firmware for Band selection. Keep an eye on the official website or router web GUI for the new updates.
If you are not sure about how to select the band manually on the router web interface, check the instructions below:
How to select 4G band manually on the web interface of LTE Gateway Routers?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Kevin_Z still I'm waiting for the firmware for MR200 v2,
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, Not sure what USA firmware did you have since we did not sell MR200 in the US and there is also no US version of this model, so the most secure is to wait for a while and send me a private message about the USA firmware so that I could have a further check for you.
For the MR200 v2, or any older models which have no beta firmware yet, we need to collect the user's feedback as much as possible to request the beta firmware from the engineers' team.
Sometimes, the feedback is scattered all over the community, and It would be highly appreciated that you could leave me a message.
Thank you very much.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Then how could i can select 5Ghz wifi cannel 163 for my MR200 V3 EU model router? It only have channel 48 in 5Ghz.
- Copy Link
- Report Inappropriate Content
Hi, I am aware that only band 4(channel 149-165) Is allowed for 5ghz in Bangladesh.
But the normal EU version does not support band 4 due to CE certification.
It is suggested that you could contact the local support for further assistance.
- Copy Link
- Report Inappropriate Content
I'll be buying a MR600v2, I just want to confirm from this community if the official firmware supports or has a feature for LTE Band selection?
- Copy Link
- Report Inappropriate Content
When will band selection be available in the regular firmware for the MR600v1 please?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 8
Views: 144911
Replies: 313
Voters 5
