5G/4G Wi-Fi Routers/MiFi
This Article Applies to: M7350 V3/V4/V5/V6.2/V7/V8 Phenomenon Description: M7350 MiFi device is stuck on the TP-Link logo during initialization after restarting Troubleshooting Suggestions: 1. Reset t
OfficialMobile Wi-Fi
7Helpful
4232Views
This Article Applies to: All TP-Link LTE Gateway Routers including Archer MR600, TL-MR6400, etc. Issue Description/Background: Some customers reported that their Jio SIM card was working fine before,
OfficialHighlighted ThreadJio 5G SIM
258Helpful
101960Views
Configuration GuideInstall 5G External Antennas on Archer and Deco 5G Routers
Why the external antennas are necessary? For Archer NX200/NX600 as well as Deco X50-5G/Deco X80-5G, they are all indoor 5G routers. Due to location constraints, it's best to place them near a window f
Highlighted ThreadOfficial
1Helpful
1681Views
Knowledge BaseDeco X50-5G or Archer NX200/Archer NX600
As Mobile service providers continue to roll out the 5G network, upgrading from traditional LTE routers to the latest 5G Technology is becoming increasingly unavoidable. To fully utilize the high-spee
Highlighted ThreadOfficial
5Helpful
10056Views
This Article Applied to Archer NX200(EU) V1 Phenomenon Description: If 5GHz band is disabled and only 2.4GHz network is on, after rebooting Archer NX200, the result is all wireless client devices fail
Official
By
Marvin_S
Marvin_S0Helpful
214Views
Hello everyone, Some customers may report their Onemesh routers are emitting a hidden network, which makes them confused and nervous as they cannot turn it off manually on the router web GUI. The hidd
OneMeshOfficialHighlighted Thread
36Helpful
18702Views
We are excited to announce the release of the TP-Link first 5G router--Archer NX200, which takes advantage of your advanced 5G network with download speeds up to 4.67 Gbps. Archer NX200 Hardware Inter
OfficialHighlighted Thread
2Helpful
6408Views
This Article Applies to: Archer NX200_V1.0 Phenomenon Description: Occasionally, users reported that certain websites can't be accessed when connecting to Archer NX200 using an EE SIM card. Upon furth
OfficialHighlighted Thread
5Helpful
971Views
If you have experienced an issue of disconnecting or slowness on the 4G Wi-Fi router’s network due to the auto band selection, Please download and install the following beta firmware on the router to
Highlighted ThreadOfficialBand Selection
158Helpful
159095Views
New ReleaseArcher MR600 V1
Hi All, Since there are several beta versions for different issues on MR600(EU) V1, now we have made a new beta firmware to fix all the previous issues. Here is the download link: Archer_MR600(EU)_V1_
Firmware UpdateOfficial
38Helpful
20021Views