@Kevin_Z 

When can I expect band selection in the normal firmware for the MR600v1?

@Kevin_Z 

I have an MR200 with these details:

Hardware version: Archer MR200 v5 00000001

Firmware version: 1.2.0 0.9.1 v0001.0 Build 210120 Rel.67320n

I'm trying to install the beta firmware from this link

Archer MR200(EU)_V5:

https://static.tp-link.com/2020/202010/20201012/Archer_MR200(EU)v5_1.0.0_0.9.1_[200925-rel32374]_up_boot_all_2020-09-30_11.15.13.zip

But I'm running into this issue

Is there another version for MR200?

@vigneshs Beta version worked for me (tested again after your messages).  Check with different browser to download file and upload to router, may be corruption in transfer process.

@myag Yes it worked for me. I was trying to upload the zip file, my bad!

Thanks @Kevin_Z 

Please add the firmware LTE band lock option for MR200 V2.

 

@TP-Link 

When can I expect the band selection feature in the regular firmware for the MR600v1?

@Kevin_Z 

Please add the firmware LTE band lock option for MR200 V2.
 

Kevin_Z wrote

If you have since experienced an issue of disconnecting or slowness on the 4G Wi-Fi router’s network due to the auto band selection, and you would like to switch the band manually by yourself you can download and install the following beta firmware on your router.

 

Archer MR600(EU)_V1:

https://static.tp-link.com/2020/202012/20201207/Archer_MR600v1_1.1.0_0.9.1_[201204-rel66940]_up_boot_2020-12-04_19.05.35.zip

Note: Please note that not all combinations of the 4G bands are supported in 4G+ mode. Only when the router and the SIM card support the same combinations of 4G band in 4G+ mode, the bands might be aggregated successfully.

 

Archer MR200(EU)_V3/V4, Archer MR400(EU)_V2/V3, TL-MR6400(EU)_V3/V4, TL-MR150(EU)_V1:

https://static.tp-link.com/2020/202007/20200714/LTE_GATEWAYv3_1.11.0_0.9.1_up_boot(200325)_2020-06-12_15.48.55.zip

 

Archer MR400(EU)_V4:

https://static.tp-link.com/beta/2021/202104/20210409/Archer_MR400(EU)v4_1.4.0_0.9.1_[210408-rel33808]_up_boot_all_2021-04-08_09.56.07.zip

 

TL-MR6400(APAC)_V3: 

https://static.tp-link.com/beta/2021/202102/20210201/LTE_GATEWAYv3_1.3.0_0.9.1_up_boot(210129)_2021-02-01_16.25.31_beta.zip

 

TL-MR6400(EU)_V5:

https://static.tp-link.com/2020/202012/20201208/TL-MR6400(EU)v5_1.1.0_0.9.1_[201113-rel63736]_up_boot_all_2020-12-08_09.38.45.zip

 

Archer MR200(EU)_V5:

https://static.tp-link.com/2020/202010/20201012/Archer_MR200(EU)v5_1.0.0_0.9.1_[200925-rel32374]_up_boot_all_2020-09-30_11.15.13.zip

 

TL-MR150(EU)_V2:

https://static.tp-link.com/2020/202011/20201117/TL-MR150(EU)v2_1.1.0_0.9.1_[200930-rel56894]_up_boot_all_2020-09-30_15.53.06.zip

 

*The official firmware has been released for the below models, you can install the latest firmware via the online upgrade or download it from the official website:

TL-MR100(EU)_V1_210119

Archer MR600(EU)_V2_200909 and later versions

TL-MR6500v(EU)_V1_200924 and later versions

 

If you are not sure about how to select the band manually on the router web interface, check the instructions below:

How to select 4G band manually on the web interface of LTE Gateway Routers?

@Kevin_Z 

@Kevin_Z 

Seem that i have encounter an erro code : 4503 when try upgrading the firmware.

Model: Archer MR400 v3

Current Firmware version: 1.16.0 0.9.1 v0001.0 Build 200414 Rel.62997n