Solution Manual Band Selection for 4G Wi-Fi Routers and LTE Gateways
If you have experienced an issue of disconnecting or slowness on the 4G Wi-Fi router’s network due to the auto band selection, Please download and install the following beta firmware on the router to manually fix the band.
Please be sure you have read The Beta Test Agreement before proceeding!
Archer MR600(EU) v2 | supported via the latest official firmware |
Archer MR600(EU)_V1 | Archer_MR600(EU)_V1_220818 (Beta firmware) |
Archer MR400(EU) V4.2 | supported via official firmware |
Archer MR400(EU) V4 | Archer_MR400(EU)v4_20210408 (Beta firmware) |
Archer MR400(EU) V2/V3 | LTE_GATEWAY_20200325 (Beta firmware) |
Archer MR200(EU) V5.2 | supported via official firmware |
Archer MR200(EU) V5 | ArcherMR200(EU)_V5_211015 (Beta firmware) |
Archer MR200(EU)V3/V4 | LTE_GATEWAY_20200325 (Beta firmware) |
TL-MR6500V(EU)V1 | supported via latest official firmware |
TL-MR6400(EU) V5.2 | supported via latest official firmware |
TL-MR6400(EU) V5 | TL-MR6400(EU)v5_20201113 (Beta firmware) |
TL-MR6400(EU) V3/V4 | LTE_GATEWAY_20200325 (Beta firmware) |
TL-MR6400(APAC) V3 | LTE_GATEWAY_20210129 (Beta firmware) |
TL-MR150(EU)V2 | TL-MR150(EU)v2_20200930 (Beta firmware) |
TL-MR150(EU)V1 | LTE_GATEWAY_20210108 (Beta firmware) |
TL-MR100(EU)V1 | supported via the latest official firmware |
M7450(EU) V2 | M7450(EU) _V2_20220303 (Beta firmware) |
M7650(EU) V1.1 | M7650(EU)_V1.1_20220427 (Beta firmware) |
Note: For MR600 v1/v2, Please note that not all combinations of the 4G bands are supported in 4G+ mode. Only when the router and the SIM card support the same combinations of 4G band in 4G+ mode, the bands might be aggregated successfully.
Besides the beta firmware, it is also planned to release the official firmware for Band selection. Keep an eye on the official website or router web GUI for the new updates.
If you are not sure about how to select the band manually on the router web interface, check the instructions below:
How to select 4G band manually on the web interface of LTE Gateway Routers?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
When are you going to release the official version permitting band selection for Archer MR200(EU)_V5:
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
You are right about Huawei ..I purchased this assuming that this would be better than my stock Huawei router (given free of charge by my ISP). Sad part is stock router is better in performance and more reliable.
- Copy Link
- Report Inappropriate Content
Please make a firmware for Archer MR400 V3 EU that can do network search manually!
It always forces me to pick network A while I inserted Sim Card for network B.
- Copy Link
- Report Inappropriate Content
TP-Link wrote
Update:
Here is the beta firmware for Archer MR400(EU) V4 to manually select the 4G band:
Thank you.
Hi,
I have the MR200 v4 and I need LTE band selection with the OneMesh option too.
Is this latest beta version compatible also with MR200 V4?
Thank you.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Kevin_Z Any chance for band selection in Archer MR200 v2?
- Copy Link
- Report Inappropriate Content
You can try it and see it. If it doesn't do onemesh, you can always go back to the latest official firmware.
However, mind you that you quoted a link for different products.
This is what meant for MR200 V4 as its title clearly states:
Archer MR200(EU)_V3/V4, Archer MR400(EU)_V2/V3, TL-MR6400(EU)_V3/V4, TL-MR150(EU)_V1:
- Copy Link
- Report Inappropriate Content
Arion wrote
You can try it and see it. If it doesn't do onemesh, you can always go back to the latest official firmware.
However, mind you that you quoted a link for different products.
This is what meant for MR200 V4 as its title clearly states:
Archer MR200(EU)_V3/V4, Archer MR400(EU)_V2/V3, TL-MR6400(EU)_V3/V4, TL-MR150(EU)_V1:
Hi Arion,
thank you for your reply.
I already tried the firmware you suggested, but it provides only the 4G band selection without onemesh.
The official firmware obviously support onemesh but there is no 4G band selection option.
Since I need both functionality I asked to @Kevin_Z if is possible to have a new firmware with both these options.
In the post #108, after the request of an user of this forum (post #107), @TP-Link provided a new beta version for Archer MR400(EU) V4 that should include both 4G band selection and onemesh functionalities.
Since MR200 and MR400 are very similar I asked if the following last beta firmware released for MR400 is also compatible with my MR200 V4.
If it is not compatible, could you arrange a new version with both functionalities also for MR200 v4.
Thank you.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 8
Views: 145008
Replies: 313