Solution Manual Band Selection for 4G Wi-Fi Routers and LTE Gateways
If you have experienced an issue of disconnecting or slowness on the 4G Wi-Fi router’s network due to the auto band selection, Please download and install the following beta firmware on the router to manually fix the band.
Please be sure you have read The Beta Test Agreement before proceeding!
| Archer MR600(EU) v2 | supported via the latest official firmware |
| Archer MR600(EU)_V1 | Archer_MR600(EU)_V1_220818 (Beta firmware) |
| Archer MR400(EU) V4.2 | supported via official firmware |
| Archer MR400(EU) V4 | Archer_MR400(EU)v4_20210408 (Beta firmware) |
| Archer MR400(EU) V2/V3 | LTE_GATEWAY_20200325 (Beta firmware) |
| Archer MR200(EU) V5.2 | supported via official firmware |
| Archer MR200(EU) V5 | ArcherMR200(EU)_V5_211015 (Beta firmware) |
| Archer MR200(EU)V3/V4 | LTE_GATEWAY_20200325 (Beta firmware) |
| TL-MR6500V(EU)V1 | supported via latest official firmware |
| TL-MR6400(EU) V5.2 | supported via latest official firmware |
| TL-MR6400(EU) V5 | TL-MR6400(EU)v5_20201113 (Beta firmware) |
| TL-MR6400(EU) V3/V4 | LTE_GATEWAY_20200325 (Beta firmware) |
| TL-MR6400(APAC) V3 | LTE_GATEWAY_20210129 (Beta firmware) |
| TL-MR150(EU)V2 | TL-MR150(EU)v2_20200930 (Beta firmware) |
| TL-MR150(EU)V1 | LTE_GATEWAY_20210108 (Beta firmware) |
| TL-MR100(EU)V1 | supported via the latest official firmware |
| M7450(EU) V2 | M7450(EU) _V2_20220303 (Beta firmware) |
| M7650(EU) V1.1 | M7650(EU)_V1.1_20220427 (Beta firmware) |
Note: For MR600 v1/v2, Please note that not all combinations of the 4G bands are supported in 4G+ mode. Only when the router and the SIM card support the same combinations of 4G band in 4G+ mode, the bands might be aggregated successfully.
Besides the beta firmware, it is also planned to release the official firmware for Band selection. Keep an eye on the official website or router web GUI for the new updates.
If you are not sure about how to select the band manually on the router web interface, check the instructions below:
How to select 4G band manually on the web interface of LTE Gateway Routers?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@AlexanderBaby CA supports JIO only .... Airtel CA only on metro city... As your concern please share the screen shots of network status will look into it.
- Copy Link
- Report Inappropriate Content
Could you share the latest beta firmware for MR600 V1 and supports BAND selection..?
and any date on the official firmware for the same? as I am tired of following up with TPLink forum for a year almost to get the proper solution and software for one Router !!!
Anyhow, Pls share the link for latest beta/official firmware to download?
One more time, MR600 V2 is available in India ??
- Copy Link
- Report Inappropriate Content
I have discovered that there is a hidden "Add" button on the left of the "Delete" button; in that area, the backgound color should be white, instead it is cyan.
Tested with Mozilla Firefox and Google Chrome.
Current firmware version: 1.1.0 0.9.1 v0001.0 Build 201204 Rel.66940n (this does not happen with the stable version 1.2.0 0.9.1 v0001.0 Build 200511 Rel.44954n).
(In Italian, "Riserva Indirizzi = Address Reservation", "Elimina" = "Delete").
Kevin_Z wrote
Can I have the screenshot? You may try with a different web browser and see if it makes a difference.
Please also confirm the current firmware version of the MR600, thanks.
- Copy Link
- Report Inappropriate Content
Hi, you can find the latest beta firmware here:
Archer MR600(EU)_V1:
Note: Please note that not all combinations of the 4G bands are supported in 4G+ mode. Only when the router and the SIM card support the same combinations of 4G band in 4G+ mode, the bands might be aggregated successfully.
- Copy Link
- Report Inappropriate Content
Thank you so much for the screenshot, glad to know you got it. We will report this to the dev and ask them to improve this.
- Copy Link
- Report Inappropriate Content
Can you please assist with getting the Beta firmware for the MR200 (V3/V4) fixed so we can manually select Band 41?
Currently, there is a bug that will not allow Band 41 selection, but all other options work OK.
Causing us alot of issues as we need to use Band 41 :(
Below is screen shot of the error when you try to select band 41.
Please help, thanks, Hayden
- Copy Link
- Report Inappropriate Content
Hello, are you on the latest beta firmware we provided on this thread?
Who is the SIM card provider, please? Could you please check the network type and band supported by your SIM card provider? If you cannot choose band 41, I'm afraid it is not supported.
- Copy Link
- Report Inappropriate Content
Hi @Kevin_Z,
Yes I tried the beta firmware: (Archer MR200(EU)_V3/V4, Archer MR400(EU)_V2/V3, TL-MR6400(EU)_V3/V4, TL-MR150(EU)_V1: LTE_GATEWAYv3_1.11.0_0.9.1_up_boot(200325)_2020-06-12_15.48.55.zip), this is not a SIM or Provider issue, this is a bug in the beta firmware affecting MR200 V4.
It will connect to Band 41 sometimes when left on default the "All Bands", but it also moves to Band 3 which has much worse signal in my area.
This is why I need the Band 41 lock to work properly. I tested same SIM card & provider in MR6400 V3 with Beta firmware, Band41 lock works as expected and connects no problem. This just seems to affect Band 41 lock only on the MR200 V4 wiith Beta firmware.
Please ask your engineers to check. Thanks, Hayden
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@AlexanderBaby @Kevin_Z Yeah, please let us know if there is way to return the product and get refund. Your product is sitting idle in my home and I am using mobile hotspot
- Copy Link
- Report Inappropriate Content
Information
Helpful: 8
Views: 146370
Replies: 312
Voters 5
