Solution Manual Band Selection for 4G Wi-Fi Routers and LTE Gateways
If you have experienced an issue of disconnecting or slowness on the 4G Wi-Fi router’s network due to the auto band selection, Please download and install the following beta firmware on the router to manually fix the band.
Please be sure you have read The Beta Test Agreement before proceeding!
| Archer MR600(EU) v2 | supported via the latest official firmware |
| Archer MR600(EU)_V1 | Archer_MR600(EU)_V1_220818 (Beta firmware) |
| Archer MR400(EU) V4.2 | supported via official firmware |
| Archer MR400(EU) V4 | Archer_MR400(EU)v4_20210408 (Beta firmware) |
| Archer MR400(EU) V2/V3 | LTE_GATEWAY_20200325 (Beta firmware) |
| Archer MR200(EU) V5.2 | supported via official firmware |
| Archer MR200(EU) V5 | ArcherMR200(EU)_V5_211015 (Beta firmware) |
| Archer MR200(EU)V3/V4 | LTE_GATEWAY_20200325 (Beta firmware) |
| TL-MR6500V(EU)V1 | supported via latest official firmware |
| TL-MR6400(EU) V5.2 | supported via latest official firmware |
| TL-MR6400(EU) V5 | TL-MR6400(EU)v5_20201113 (Beta firmware) |
| TL-MR6400(EU) V3/V4 | LTE_GATEWAY_20200325 (Beta firmware) |
| TL-MR6400(APAC) V3 | LTE_GATEWAY_20210129 (Beta firmware) |
| TL-MR150(EU)V2 | TL-MR150(EU)v2_20200930 (Beta firmware) |
| TL-MR150(EU)V1 | LTE_GATEWAY_20210108 (Beta firmware) |
| TL-MR100(EU)V1 | supported via the latest official firmware |
| M7450(EU) V2 | M7450(EU) _V2_20220303 (Beta firmware) |
| M7650(EU) V1.1 | M7650(EU)_V1.1_20220427 (Beta firmware) |
Note: For MR600 v1/v2, Please note that not all combinations of the 4G bands are supported in 4G+ mode. Only when the router and the SIM card support the same combinations of 4G band in 4G+ mode, the bands might be aggregated successfully.
Besides the beta firmware, it is also planned to release the official firmware for Band selection. Keep an eye on the official website or router web GUI for the new updates.
If you are not sure about how to select the band manually on the router web interface, check the instructions below:
How to select 4G band manually on the web interface of LTE Gateway Routers?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
today I see an update for MR200 V4 on your website:
LTE_GATEWAY_1.18.0_0.9.1_up_boot(201127)_Rel_2020-11-30_09.48.31.bin
Could you confirm that this new firmware version implements the 4G band selection feature (like the beta version)?
Thank you
- Copy Link
- Report Inappropriate Content
@Kevin_Z About MR200 firmware, what else difference does this beta version has then the latest firmware? Is there any change logs.?
Also, I'm getting more signal strength in mobile and less in router at same location. Any config missing? Please suggest.
- Copy Link
- Report Inappropriate Content
Hello, Last week I bought the ARCHER MR200 in the UK and now I'm Chile with a CLARO CHILE data sim card and no connection at all. I wonder if there is some kind of incompatibility between this router (bought in the UK) and the network signal (working in Chile). If so, the manual setting should be quite useful, I thought to myself. SO I created a profile with the APN data for the CLARO network, and still not working! Any clues about what should I try next? A bit annoyed, tbh.
- Copy Link
- Report Inappropriate Content
This beta firmware does not allow "address reservation" on Archer MR600 V1.x.
The "Add" button is not present in the related section ("Advanced - Network - LAN settings").
- Copy Link
- Report Inappropriate Content
We would like to escalate your case to our engineers, and they will help follow it up, if you are willing to do further analysis, please check your inbox and respond.
- Copy Link
- Report Inappropriate Content
Hello, as confirmed with the engineers, the latest firmware doesn't merge the band selection option, if you need to choose the band manually, it is suggested to keep the beta firmware. Please keep an eye on the website for any future firmware updates later.
- Copy Link
- Report Inappropriate Content
Hello, as just replied to attanasio89 that the beta firmware we provided allows you to choose the band manually, while the latest official version doesn't allow that. As for the modifications on the latest version, what you can find is what we know about:
Modifications and Bug Fixes
Fixed incompatibility issue with some TP-Link Range Extender 4-Address mode
Fixed the issue that web interface might not be accessed after rebooting
What is the signal strength when you put the SIM card in the MR200? And what is it when it is on the phone? Please refer to Case One on this article to verify the details:
https://www.tp-link.com/support/faq/2843/
Agent404 wrote
@Kevin_Z About MR200 firmware, what else difference does this beta version has then the latest firmware? Is there any change logs.?
Also, I'm getting more signal strength in mobile and less in router at same location. Any config missing? Please suggest.
- Copy Link
- Report Inappropriate Content
Try to refer to the article first to troubleshoot:
https://www.tp-link.com/support/faq/2468/
https://www.tp-link.com/support/faq/2469/
Analizame wrote
Hello, Last week I bought the ARCHER MR200 in the UK and now I'm Chile with a CLARO CHILE data sim card and no connection at all. I wonder if there is some kind of incompatibility between this router (bought in the UK) and the network signal (working in Chile). If so, the manual setting should be quite useful, I thought to myself. SO I created a profile with the APN data for the CLARO network, and still not working! Any clues about what should I try next? A bit annoyed, tbh.
- Copy Link
- Report Inappropriate Content
Can I have the screenshot? You may try with a different web browser and see if it makes a difference.
Please also confirm the current firmware version of the MR600, thanks.
ralphm24 wrote
This beta firmware does not allow "address reservation" on Archer MR600 V1.x.
The "Add" button is not present in the related section ("Advanced - Network - LAN settings").
- Copy Link
- Report Inappropriate Content
Hello, I have bought router MR600 only for the Carrier Aggregation feature. Now I have experienced that this router will not support CA with airtel and Jio.
TP-Link India website TP-Link says "all you need to do is insert a micro SIM card and turn on the Router" (refer screenshot below). I am not understanding that with TP-Link selling their products in India with wrong information? If you are unable to enable 4+(CA) in India, you should remove it from India website.
Please can you let us know, When we can expect band selection and 4G+ CA for airtel/jio (India) feature in Official firmware update?
If it is not possible to enable CA in Indian Mobile carriers then please could you provide us the procedure to send this product back you and get a refund?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 8
Views: 146258
Replies: 312
Voters 5
