Solution Manual Band Selection for 4G Wi-Fi Routers and LTE Gateways
If you have experienced an issue of disconnecting or slowness on the 4G Wi-Fi router’s network due to the auto band selection, Please download and install the following beta firmware on the router to manually fix the band.
Please be sure you have read The Beta Test Agreement before proceeding!
| Archer MR600(EU) v2 | supported via the latest official firmware |
| Archer MR600(EU)_V1 | Archer_MR600(EU)_V1_220818 (Beta firmware) |
| Archer MR400(EU) V4.2 | supported via official firmware |
| Archer MR400(EU) V4 | Archer_MR400(EU)v4_20210408 (Beta firmware) |
| Archer MR400(EU) V2/V3 | LTE_GATEWAY_20200325 (Beta firmware) |
| Archer MR200(EU) V5.2 | supported via official firmware |
| Archer MR200(EU) V5 | ArcherMR200(EU)_V5_211015 (Beta firmware) |
| Archer MR200(EU)V3/V4 | LTE_GATEWAY_20200325 (Beta firmware) |
| TL-MR6500V(EU)V1 | supported via latest official firmware |
| TL-MR6400(EU) V5.2 | supported via latest official firmware |
| TL-MR6400(EU) V5 | TL-MR6400(EU)v5_20201113 (Beta firmware) |
| TL-MR6400(EU) V3/V4 | LTE_GATEWAY_20200325 (Beta firmware) |
| TL-MR6400(APAC) V3 | LTE_GATEWAY_20210129 (Beta firmware) |
| TL-MR150(EU)V2 | TL-MR150(EU)v2_20200930 (Beta firmware) |
| TL-MR150(EU)V1 | LTE_GATEWAY_20210108 (Beta firmware) |
| TL-MR100(EU)V1 | supported via the latest official firmware |
| M7450(EU) V2 | M7450(EU) _V2_20220303 (Beta firmware) |
| M7650(EU) V1.1 | M7650(EU)_V1.1_20220427 (Beta firmware) |
Note: For MR600 v1/v2, Please note that not all combinations of the 4G bands are supported in 4G+ mode. Only when the router and the SIM card support the same combinations of 4G band in 4G+ mode, the bands might be aggregated successfully.
Besides the beta firmware, it is also planned to release the official firmware for Band selection. Keep an eye on the official website or router web GUI for the new updates.
If you are not sure about how to select the band manually on the router web interface, check the instructions below:
How to select 4G band manually on the web interface of LTE Gateway Routers?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
What is the specific firmware version of your MR600 V2? And did you purchase it on your own or got it from your ISP?
- Copy Link
- Report Inappropriate Content
@Kevin_Z hallo bang, untuk tp link to mr6400 V1 yg mana ya
hello, which firmware for tplink mr6400 V1?
- Copy Link
- Report Inappropriate Content
I've updated my TL-MR6400 V3 (APAC) to the latest beta firmware, yet there's still no option to change bands manually.
- Copy Link
- Report Inappropriate Content
Hello everyone,
I bought a MR200 a month ago to put behind a omni 4G external antenna. The seller listed this router as able to select the 4G bands.
What a disappointment to realize that I have the version 6 and it doesn't include the feature. I can't figure out why it was standard on the v5, the v6 feel like a downgrade.
Do you know if and when a firmeware update is scheduled for the v6 ?
Thanks a bunch
- Copy Link
- Report Inappropriate Content
Could I receive the band selection feature in a future software update?
Firmware Version: 1.2.0 0.9.1 v0001.0 Build 210120 Rel.67320n
Hardware Version:Archer MR200 v5 00000001
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi
please verify this issue
After updating firmware from Archer MR600(EU)_V2_220105 to Archer MR600(EU)_V2_220826 found that Wi-Fi Routers not supported in 4G+ mode.
thank.
- Copy Link
- Report Inappropriate Content
Hi,
The new firmware Archer MR600(EU)_V2_220826 still supports 4G+.
It defaults to using 4G for low-bandwidth network activities and will switch to 4G+ for high bandwidth activities.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 8
Views: 145884
Replies: 312
Voters 5
