Solution Manual Band Selection for 4G Wi-Fi Routers and LTE Gateways
If you have experienced an issue of disconnecting or slowness on the 4G Wi-Fi router’s network due to the auto band selection, Please download and install the following beta firmware on the router to manually fix the band.
Please be sure you have read The Beta Test Agreement before proceeding!
| Archer MR600(EU) v2 | supported via the latest official firmware |
| Archer MR600(EU)_V1 | Archer_MR600(EU)_V1_220818 (Beta firmware) |
| Archer MR400(EU) V4.2 | supported via official firmware |
| Archer MR400(EU) V4 | Archer_MR400(EU)v4_20210408 (Beta firmware) |
| Archer MR400(EU) V2/V3 | LTE_GATEWAY_20200325 (Beta firmware) |
| Archer MR200(EU) V5.2 | supported via official firmware |
| Archer MR200(EU) V5 | ArcherMR200(EU)_V5_211015 (Beta firmware) |
| Archer MR200(EU)V3/V4 | LTE_GATEWAY_20200325 (Beta firmware) |
| TL-MR6500V(EU)V1 | supported via latest official firmware |
| TL-MR6400(EU) V5.2 | supported via latest official firmware |
| TL-MR6400(EU) V5 | TL-MR6400(EU)v5_20201113 (Beta firmware) |
| TL-MR6400(EU) V3/V4 | LTE_GATEWAY_20200325 (Beta firmware) |
| TL-MR6400(APAC) V3 | LTE_GATEWAY_20210129 (Beta firmware) |
| TL-MR150(EU)V2 | TL-MR150(EU)v2_20200930 (Beta firmware) |
| TL-MR150(EU)V1 | LTE_GATEWAY_20210108 (Beta firmware) |
| TL-MR100(EU)V1 | supported via the latest official firmware |
| M7450(EU) V2 | M7450(EU) _V2_20220303 (Beta firmware) |
| M7650(EU) V1.1 | M7650(EU)_V1.1_20220427 (Beta firmware) |
Note: For MR600 v1/v2, Please note that not all combinations of the 4G bands are supported in 4G+ mode. Only when the router and the SIM card support the same combinations of 4G band in 4G+ mode, the bands might be aggregated successfully.
Besides the beta firmware, it is also planned to release the official firmware for Band selection. Keep an eye on the official website or router web GUI for the new updates.
If you are not sure about how to select the band manually on the router web interface, check the instructions below:
How to select 4G band manually on the web interface of LTE Gateway Routers?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
No, you cannot install the beta firmware for the MR400 v4 on your MR200, we will check this with the developer again if we could provide a new beta firmware.
BTW, what if you try to manually select the band on the beta version, then update to the latest official version on the MR200, will you still use the selected band and use Onemesh?
- Copy Link
- Report Inappropriate Content
My ISP offers 3 bands
4G: Bands 3 and 20
3G: Band 8
How can I select to only use band 3 for 4G (Band 20 is slow)?
If I select 3+NONE, it is using 3,20
If I select 3+3, it is using 3,20
If I select 3+8, it is using 3,20
So, it is always using 3,20 regardless of the band setting.
MR600v1
- Copy Link
- Report Inappropriate Content
After you choose band 3, please check and ensure you have saved the settings, then reboot the router. Login to the web GUI again to check and ensure it is also chosen the signal band 3, and then show us the status page, where display a band 3, 20.
Just to confirm, who is the SIM card carrier? Is it possible to test this with another SIM card?
- Copy Link
- Report Inappropriate Content
OK i need to reboot the router for every band change?
Can't do that at the moment.
Edit: I was able to trigger the band change by selecting "3G only" and then "4G only" afterwards. Now it is correct, band 3 only.
Edit2: But some weird things happening.
If I select to use Band 3,NONE -> Band 3 is used
If I select to use Band 3,20 -> Band 20 is used (no band 3)
Combination of Band 3 and 20 is not possible anymore. Only single band 3 or band 20.
- Copy Link
- Report Inappropriate Content
The file for MR400 is not present their, Please can you have a look into this.
Thanks in advance.
- Copy Link
- Report Inappropriate Content
Do you mean MR400 V4? It is available:
Archer MR400(EU)_V4:
- Copy Link
- Report Inappropriate Content
Yes I mean that, when i tries to open this link I get this messgae.
-->
Please go to TP-Link Offical Website to get products, software and services for your region.
Visit official TP-Link website >
--> Can you please check the link onces.
- Copy Link
- Report Inappropriate Content
Weird. Try to copy the whole URL into the address bar of the browser, will you open it? We will confirm this.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Great.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 8
Views: 146731
Replies: 312
Voters 5
