MR6400 VPN IPSec

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

MR6400 VPN IPSec

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
MR6400 VPN IPSec
MR6400 VPN IPSec
2020-10-15 15:33:24
Model: TL-MR6400  
Hardware Version: V4
Firmware Version: 1.16.0 0.9.1

I want to make a IPSec VPN from several MR6400 routers to a R600VPN server. It works if I set R600VPN as initiator, but I need that MR6400 act as initiator because the ip given by the mobile operator is behind a NAT, so isn't public. Is there any way to set the MR6400 as IPSec initiator? I know that from V5 hardaware version, TP Link have eliminated IPSec VPN option. Other brands have a functional VPN togheter with the 4G router. What is the option with TP Link, using two routers 4G and VPN for each location?

  0      
  0      
#1
Options
1 Reply
Re:MR6400 VPN IPSec
2020-10-21 07:32:41

@marcoahp 

Good day.

Thank you very much for your time and patience.

Sorry for the delay.

If the IPsec VPN initiator is behind the NAT, you could consider requesting the public IP address via a different APN account from the SIM card carrier;

Or open the related ports for IPsec VPN connection on the SIM card carrier, such as UDP 500,4500;

 

Thanks a lot.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options