No Internett
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
No Internett
After a brake/cut in the electricity in the house, my Internett stop working. The power and the wifi sign are on, but not the sign for Internett
Re:No Internett
Good Day,
Thank you very much for your patience.
Please refer to the following suggestions:
- Reset the MR200 by holding the reset pinhole for 10s;
- If still no internet, please log into the MR200 via http://tplinkmodem.net; and check the following information:
If there is a WAN address, please try to change the DNS server to be 8.8.8.8/8.8.4.4 and restart the modem;
If there is no IP address, please try to manually update the APN from the sim card carrier;(if not sure what APN username and password, please contact the carrier first.)
Thank you~
Nice to Meet You in Our TP-Link Community.
Check Out the Latest Posts:
Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router
EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller.
Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability.
TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode.
If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.