@Gr3ed You're doing just fine but your router WAN IP address is a private IP address - 192.168.1.214 - details (Step 4). Unless you get a public IP address, this won't work - contact your ISP and ask...

@lemiel You can try the following: Set BE230 in AP mode and connect the two AX53 as a satellite devices to the BE230 via ethernet backhaul, EasyMesh Is available when BE230 works in AP mode as a...

@lemiel When a router is configured in AP mode its DHCP server should be turned off so only the main router DHCP server would provide IP addresses in your network - details. When in AP mode the...

@TonyN You can start by going through this MS article.

@TonyN You have a special configuration on your VR400. From your screenshot: LAN1 port is configured for IPTV service and it will give IP addresses from 192.168.2.1/255.255.255.0 subnet to every...

@Sam_Maran You can always contact your local support for further assistance if no one can give a satisfying answer here.