Forums/
Wi-Fi Routers
4 hours ago
@celos According to your screenshot a device with the name AwFamily2 is connected to your main router in Easymesh via its ethernet port - so your configuration seems correct.
0HELPFULS
Forums/
Wi-Fi Routers
4 hours ago
@Zeedent7 It's here where you select the port to behave as WAN or LAN: If 2.5 gbps port is not selected as an internet port it should behave as LAN port.
0HELPFULS
Forums/
DSL Modem Routers
Friday
@vegg Check your cabling - either change the cable that connects the PC to the router or change the port where the PC connects to the router.
0HELPFULS
Forums/
Wi-Fi Routers
Thursday
@mkfzdmr You can't set value of "0" for the VLAN ID as it can be seen from your screenshot. The default VLAN ID is "1", so you should set a value from "2" to "4094". You can conatct your local...
0HELPFULS
Forums/
Wi-Fi Routers
Tuesday
@Tsahi It should - check this setting:
0HELPFULS
Forums/
Range Extenders
Tuesday
@MikeJH If the WPS method doesn't work for you try the one through the RE315's WebGUI - details.
1HELPFULS