@icosta Solved. Cable pinning problem. Thanks for the support.

When creating a LAG LACP, I followed the steps from: https://www.tp-link.com/us/support/faq/991/ Previously I performed a system reset. Then went L2 Features>LAG>LACP Config /Global Config I selected...

@R1D2 R1D2 wrote You need to inform the router that the next hop for network 192.168.10.0/24 is the switch at 192.168.1.253/24. Just add network rules for your VLANs 10 and 20. Routes and rules added...

@R1D2 the switch is directly connected to the router (Huawei HG8247Q), owned by the communications provider, that does not have a GUI / Cli to obtain the routing table. However, tomorrow I intend to...

@R1D2 Dear R1D2 Thank you for your care. I checked again the route table (see attachment) and found no lack of routing. I ping from PC connected to port 7 / vlan_10 with the configuration: IP:...

I have a Tp-Link Switch model T2600G-28TS, I made 4 VLANs: VLAN_1 (port 1 to 2), VLAN_10 (port 3 to 10), VLAN_20 (port 11 to 20) and VLAN_50 (port 23 to 24) , I have assigned PVID for each port to...