MigoLV1Online
Following: 0Followers: 0
Forums/ WiFi
2021-01-31 18:10:29
Re:WLAN Network - Users are disconnected arbitrary
Hello @Fae, thanx for giving first hints and starting the discussion ;-) -With Omada SDN Controller, it's possible. But the EAP245 V1 doesn't support Omada SDN, you may stay with Controller v3.2.10....
0HELPFULS
Forums/ WiFi
2021-01-25 16:55:49
Update to V4
Controller: Omada Software Controller v3.2.10 Access Points: EAP245(EU) 2x V1.0 EAP245(EU) 2x V3.0 EAP225(EU) 1x V3.0 - Mesh - EAP225-Outdoor(EU) 1x V1.0 Hello, I have WLAN Network with the above...
0HELPFULS
Forums/ WiFi
2021-01-25 16:50:06
WLAN Network - Users are disconnected arbitrary
Controller: Omada Software Controller v3.2.10 Access Points: EAP245(EU) 2x V1.0 EAP245(EU) 2x V3.0 EAP225(EU) 1x V3.0 - Mesh - EAP225-Outdoor(EU) 1x V1.0 Hello, I have a WLAN Home Network with the...
0HELPFULS
Forums/ Switches
2020-01-05 08:25:52
Re:VLAN configuration with T1500G-10PS
Just an additional question: Is it possible to update the Hardware Version V1 of Model: T1500G-10PS(TL-SG2210P) with the Firmware Version: 2.0.3 Build 20190509 Rel.36379(s)? Or is it better to stay...
0HELPFULS
Forums/ Switches
2020-01-05 08:13:27
Re:VLAN configuration with T1500G-10PS
Hello R1D2, thanks a lot for tipps and hints Finally I could manage to configure the switch as you suggested ... ... now the next steps for the different WLANs in different VLANs configured with...
0HELPFULS
Forums/ Switches
2020-01-04 22:31:14
Re:VLAN configuration with T1500G-10PS
Hello R1D2, the problem I have is that the management VLAN ID needs a PVID. But when for port 1 (tagged) or port 8 (untagged) the PVID is set to 10 (instead of 1) the connection to the switch is lost...
0HELPFULS
12