Forums/
WiFi
2018-11-05 06:32:54
My network have 2 segment with 2 subnet and alot device in producing. I plan to upgrade some old AP to EAP 225 and using one OC200 for all the AP in 2 subnet. You should look my network diagram, I...
0HELPFULS
Forums/
WiFi
2018-10-28 13:38:47
Can not connect to OC200 when use VLAN managed on AP side. They appear in OC200 but can not adopt, alway say wrong password ?
0HELPFULS
Forums/
WiFi
2018-10-25 05:08:40
I use EAP 225 V3 and OC200 They are both in same VLAN and same subnet (10.0.8.0/22) from DHCP server, check ping success to EAP and OC225 I reset EAP password many time and tried default password,...
0HELPFULS
Forums/
Switches
2018-10-23 15:26:59
There is only "Apply" button on page "MTU VLAN Configuration", when press Apply it turn back to port 1. I tried Chrome and Firefox from Smartphone and PC
0HELPFULS
Forums/
WiFi
2018-10-23 15:23:40
I enable VLAN Managed on EAP225 (indoor V3.0, 2.3.0 Build 20180628 Rel. 54512 ), It appear in Omada controller (OC200) but can not connect, alway say wrong password. When disable VLAN managed and...
0HELPFULS
Forums/
Switches
2018-10-21 06:09:30
I can not change MTU VLAN port from 1 to 24, after apply it fall back to port 1 ? Firmware: 1.0.1 Build 20180416 Rel.56818 Hardware : TL-SG1024DE 3.0
0HELPFULS