@Peter87 After you connected two WAN ports to your modem, if both WAN ports can get IP address, I think 200Mbps bandwidth can be utilized. Just worry about that two WAN ports cannot use the IP...

@robblack26 Did not find those product on TP-Link website. Where did you see those product?

@ajgor1979 R600VPN V2 can upgrade the V3 firmware. Suggest to upgrade the V3 firmware. And try to access the RDP locally. Make sure it works with port 3390.

@the_classic_one It seems that the version3 has the toggle switch. Version4 remove this switch and support auto negotiation. I think you can check your fiber. MC210CS uses single mode and 1310nm wave...

@VicenteSoftek I have 2 ideas. 1. If you are familiar with ACL, you can block the internal traffic for port 11,12,13,16 through ACL. For example, suppose your LAN subnet is 192.168.0.0/24 and gateway...

@dab123 This is not a complicate network, you can based on the ubiquity toppology, change the devices to TP-Link. Router: ER6120 Swtich: T1600G-28PS AP: EAP225-outdoor