@hbpmk Hi If you want to set port forwarding, you can go to Advanced->NAT->Virtual Server. But I think you don't need to use VPN and port forwarding at the same time. When you establish VPN, you...

@iLX You can the tunnel list on router for confirming whether the VPN is established. You don't need to open some ports in the firewall. Because after the VPN is established, the VPN client should be...

@chabral IPsec VPN may not meet your requirements. If you use L2TP VPN for both sides, maybe can meet your demand. [PC/192.168.0.0/24] ---- [L2TP VPN] ---> [TL-R600VPN LAN 172.16.16.0/24] --- [L2TP...

@Oilersman Hi Please confirm your ethernet 2 IP address and your router's LAN IP . They cannot in the same subnet. You can confirm the ethernet 2 IP address when eth 2 directly to your PC.

@VicenteSoftek If you don't mind, you can post your configuration here. (backup your config file then open the file with txt). Please remember to save your configuration before backup config. Maybe I...

@Peter87 There is a complicated method. Use two PC connect to your network. Set up policy routing on R470T+. Make two PC's traffic go through different WAN ports. Then run speedtest.net on both PC at...