@Clive_A Late response but could there be a workaround? Other posts mention that One-To-One NAT is possible with a Static IP address. And indeed if I disable the Advanced option "Get IP Address from...

I have a ER707-M2 v1.0 WAN connected via PPPoE. This means I cannot define a static WAN IP address. A static WAN IP address is a requirement for One-To-One NAT to be able to use multiple public ip...

Tedd404 wrote @cdnhk if you unblock it, does it work properly? switch acl if you have switch. @Tedd404 if you unblock it, does it work properly? Yes it does switch acl if you have switch. Yes I have...

There is no error. Just cannot reach it. An nslookup resolves to the WAN address (as it should). But this rule blocks access => Gateway ACL: Deny LAN->LAN VLAN200 -> LAN and I should probably need to...

Hi, I've setup a 'guest' VLAN (VLAN200) that has no access to VLAN1 but can access internet resources. VLAN1 can access VLAN200 but not the other way around. A webserver in VLAN1 is portmapped from...

@Clive_A Thats it. Just missed that it was 'hidden' under VLAN interface. Thanks.