@Retro7631 Is your ISP modem set as DHCP, meaning it assigns IP addresses to your network? You state that the CPE710 connected to the ISP Modem is set to DHCP. Are you saying it is set to Dynamic...

@Virgo No, I just confirmed speed was not affected between the two Unifi Gigabeams, or between the Root Gigabeam and my router. That made me feel fairly confident that the issue was either the...

@SmokehouseBay Yes just run an ethernet cable from the LAN port on the POE adapter of the client CPE, inside to a device of your choice like a wireless router or an access point. You do not get POE...

@d0ugmac1 I took the TPlink switch out and put a Yuanley YS 2080G-P 8 Port POE switch that I had on hand anyway. The same issue occurs with the 610 and 225 when wired to the switch and adopted by...

I have had this ongoing issue with the TL-SG2210MP limiting throughput. I have a Unifi Gigabeam (AP) wired to port 7. The second Unifi Gigabeam (Client) is wired to my router. Initially throughput is...

@d0ugmac1 I got around to changing one of the EA225 Outdoor to ROOT. I also connected one of the remote EAP255 to it so that it has similar conditions as the ROOT EAP610. The ROOT EAP225 dropped from...