@DBShelton You would need to set the working CPE710 to Client Mode as outlined in the images I posted earlier. Manually set the EAP610 to channel 161 as outlined earlier. Unless you provide screen...

@DBShelton ok then you where nowhere near setting up a connection between the two. First your EAP610 5Ghz Radio needs to be on the higher channels. Not sure which channels are compatible but to keep...

@DBShelton Ok but can you elaborate on why you could not get the CPE710 to connect to the EAP610? Did you ever see the EAP610 wifi in the scan list of the CPE710?

@mprattmd Just to troubleshoot, check in the Omada Controller Software and see if MESH is enabled. Disable it and see if throughput picks back up.

@DBShelton what exactly didn't work? I have used one CPE710 in several locations to connect to an existing Wi-Fi network to do exactly what you are attempting. I have two setups that have been in...

@Ajithkumar You signal of -93 is not good. It would be better if you could post screen captures of the Status Tab and Wireless Tab of both the AP and Client CPE710. Also what is the distance and is...