yves.remyLV1Online
Following: 0Followers: 0
Forums/ 5G/4G Wi-Fi Routers/MiFi
2024-08-09 12:25:39
Re:Looking for firmware Nx510v -all Operator
@mlg50man hi can we have the original firwre of this device to try to push it on. i didn't found the NX510v firmware on eu site. thank you
0HELPFULS
Forums/ WiFi
2023-11-29 08:41:23
Re:EAP653 dropped packets
HI a cx have an unstability with WIFI connexion using EAP-653(EU) using the firmwrae 1.09 . the OMADA controller is an OC300 on 5.12 version. and the WLAN optimization , or avanced function check...
0HELPFULS
Forums/ Switches
2022-11-14 13:35:07
Re:the Auto mode dind't detect 1Gbps, we nned to force the mode
@yves.remy as i didn't have reply i post again my request: I understand that the OC200 erases the configuration, but why I have to force the speed port. it's just because the settings is coming to...
0HELPFULS
Forums/ Switches
2022-11-09 14:24:21
Re:the Auto mode dind't detect 1Gbps, we nned to force the mode
I understand that the OC200 erases the configuration, but why I have to force the speed port, it's just because the default TL-SX3016F switch when integrated on omada, it can't detect the speed on...
0HELPFULS
Forums/ Switches
2022-11-08 14:13:26
the Auto mode dind't detect 1Gbps, we nned to force the mode
Hi , on the TL-SX3016F, we found the same issue like the TL-SX3008F by the past with the AUTO detection on SFP port speed. it is possible to change the speed port using CLI to 1Gbps, , but when we...
0HELPFULS