@MantonL - what I've suggested above won't address your issue: I'm talking about where an AP is offline or removed, and thus it becomes impossible for a client to connect at all. This is a very clear...

@Vincent-TP ta for the pointer, done: Omada "Lock to AP" should have an additional "prefer" option Omada MUST clear "Lock to AP" client settings when the AP is removed from Omada ('forgotten')

This is related to, but separate from https://community.tp-link.com/en/business/forum/topic/736982 The Omada "Lock to AP" is currently not cleared when the AP the client is locked to is removed from...

The Omada "Lock to AP" should have three options (the first two exist now on/off; the third should be added): 1. don't lock (off) 2. permanent / hard lock (clients will be denied when AP not...

If you're using the Omada "Lock to AP" function, be aware that when the target AP is not connected the client will be denied completely and be unabe to connect to the WiFi network. TPLink does...

@Clive_A - you were correct; this was fixed by updating my Omada installation to 5.9. I can confirm that under Omada 5.9.31, the TL-SG2210P is displaying the expected PoE 'lightning bolt' icons and...