EB810v cant change wifi channel
Hi,
I cant seem to change the 5Ghz wifi channel on this router it keeps defaulting to channel 44 and 160MHz channel width. When i attempt to change it to Auto for both settings after refreshing the webgui router configuration webpage it just defaults back to the defaults above. I think its a firmware issue... can someone advice. Thanks
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @The_Unknown,
EB810v is a customized device specifically designed for local Service Providers. Its software is tailored to meet the unique requirements of these providers, ensuring alignment with their specific needs. While our technical support team is adept at providing general guidance and suggestions for products with standard, generic firmware. However, due to the specialized nature of the firmware on your device, our ability to provide troubleshooting may be limited.
We can certainly offer some troubleshooting tips that may help resolve your issue. Please consider the following:
1. Please restart the router and try again; (make sure you are using the owner account of the router)
2. Check whether you can modify the 2.4Ghz channel;
3. Change the browser, or clear the browser cache;
If the problem persists after trying these steps, we recommend contacting the technical support of your Service Provider who supplied the device, as they are best suited to provide the necessary assistance for your device.
- Copy Link
- Report Inappropriate Content
Hi,
I see the EB810v is an Aginet router. In case you have got this router provided by your Internet Service Provider (ISP) as part of your broadband service plan, then it's likely your ISP is controlling the channel settings of the router.
- Copy Link
- Report Inappropriate Content
@woozle is there any custom firmware i can flash to change it?
- Copy Link
- Report Inappropriate Content
Hi @The_Unknown,
EB810v is a customized device specifically designed for local Service Providers. Its software is tailored to meet the unique requirements of these providers, ensuring alignment with their specific needs. While our technical support team is adept at providing general guidance and suggestions for products with standard, generic firmware. However, due to the specialized nature of the firmware on your device, our ability to provide troubleshooting may be limited.
We can certainly offer some troubleshooting tips that may help resolve your issue. Please consider the following:
1. Please restart the router and try again; (make sure you are using the owner account of the router)
2. Check whether you can modify the 2.4Ghz channel;
3. Change the browser, or clear the browser cache;
If the problem persists after trying these steps, we recommend contacting the technical support of your Service Provider who supplied the device, as they are best suited to provide the necessary assistance for your device.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 235
Replies: 3
Voters 1