Archer AX55 v1.0 не работает сеть 2.4g

Archer AX55 v1.0 не работает сеть 2.4g

Archer AX55 v1.0 не работает сеть 2.4g
Archer AX55 v1.0 не работает сеть 2.4g
Wednesday - last edited Monday
Model: Archer AX55  
Hardware Version: V1
Firmware Version: 1.3.3 Build 20240628 rel.37017(4555)

Доброго времени суток!

роутер Archer AX55 v1.0  прошивка 

1.3.3 Build 20240628 rel.37017(4555)

Начали отваливаться все устройства на 2.4g. Повторно нельзя приконектить. 

В настройках роутера убераешь галочку Smart Connect как бы разеденяя на сети 2.4 и 5g. 

Но к 2.4g подключиться нельзя. 

Я не сразу понял что такая беда на старой прошивке просто переходила безшовно на 2.4g где не доставала 5g.

А щас просто отваливается сеть переходит на мобильную, если таковой нет, просто отключается.

Соответственно и стало покрытие хуже не везде ловит сеть.

  0      
  0      
#1
Options
1 Accepted Solution
Re:Archer AX55 v1.0 не работает сеть 2.4g-Solution
Thursday - last edited Monday

  @Bazil_V 

Hi,

 

Is there any error message when you fail to connect the 2.4G?

Please reboot the router, and make sure that you have input the correct password. You can also change the 2.4G channel and channel width.

 

If it still cannot help, you can also reset the router and then try again.

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Archer AX55 v1.0 не работает сеть 2.4g-Solution
Thursday - last edited Monday

  @Bazil_V 

Hi,

 

Is there any error message when you fail to connect the 2.4G?

Please reboot the router, and make sure that you have input the correct password. You can also change the 2.4G channel and channel width.

 

If it still cannot help, you can also reset the router and then try again.

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options