BE900 breaks IPv4 over IPv6 for Japan-based ISPs
The v1.1.1 firmware for the BE900 (available at https://www.tp-link.com/jp/support/download/archer-be900/#Firmware) renders the router unusable for Japanese internet providers.
In Japan, we rely on VNEs to route IPv4 traffic over IPv6. For those with Flets Hikari Cross connections (like myself), this is actually the only option to get IPv4 traffic working, since this connection type doesn't allow PPPoE connections for IPv4. For example, my ISP uses v6plus. It was working fine in v1.0.5, but the v1.1.1 update broke the functionality for all Japan-based ISPs.
The device was just released in Japan, so those of us who spent about 600 USD to purchase the device domestically cannot access the internet normally.
As a warning, do not update the device to v1.1.1 if you reside in Japan and do not enable auto-update.
Myself and many others will likely be seeking refunds, but we hope the developers will notice and quickly update the firmware so that users in Japan can get basic functionality.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thank you very much for your follow-up.
The reported issue has been resolved via a new official firmware. You can check for the updates on your router web GUI, or you can download it from the below link directly:
- Copy Link
- Report Inappropriate Content
Hi,
Thank you so much for taking the time to post the issue on the TP-Link community!
To better assist you, I've created a support ticket via your registered email address, and escalated it to our support engineer to look into the issue. The ticket ID is TKID241122018, please check your email box and ensure the support email is well received. Thanks!
Once the issue is addressed or resolved, welcome to update this topic thread with your solution to help others who may encounter the same issue as you did.
Many thanks for your great cooperation and patience!
- Copy Link
- Report Inappropriate Content
@Sunshine Thank you, appreciate the attention and have replied to the email with the requested information. Upon resolution, will update this thread with the appropriate info.
That said, the issue will definitely require a firmware update to resolve, so I'm not sure the info requested (screenshots of settings) will be helpful. Could I recommend creating a beta firmware update as a regression (for example, calling it 1.1.2 beta for Japan users, which simply reverts back to the 1.0.5 binary) until the IPoE fix is ready with MLO and other new 1.1.1 features intact?
That way, we could at least use the product as a router as intended rather than being limited to use as an access point, and you would not have to rush a hotfix.
- Copy Link
- Report Inappropriate Content
Hi,
Thanks for your update.
I would forward your suggestions to the senior engineers team.
- Copy Link
- Report Inappropriate Content
Thank you very much for your follow-up.
The reported issue has been resolved via a new official firmware. You can check for the updates on your router web GUI, or you can download it from the below link directly:
- Copy Link
- Report Inappropriate Content
@Kevin_Z Thank you, I've installed the update and can confirm the router now connects to v6plus as expected. Really appreciate the quick turnaround, I am getting excellent speeds with the unit so glad to make it my main home router now.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 295
Replies: 6
Voters 0
No one has voted for it yet.