Home Network Community > All Threads > AX23 v1.2 and RE315 not connecting via Ethernet Backhaul EasyMesh
< All Threads

AX23 v1.2 and RE315 not connecting via Ethernet Backhaul EasyMesh

AX23 v1.2 and RE315 not connecting via Ethernet Backhaul EasyMesh

AX23 v1.2 and RE315 not connecting via Ethernet Backhaul EasyMesh
AX23 v1.2 and RE315 not connecting via Ethernet Backhaul EasyMesh
2024-10-24 20:38:50
Tags: #EasyMesh Ethernet Backhaul #OneMesh #EasyMesh #Network Connectivity
Model: Archer AX23  
Hardware Version: V1
Firmware Version: 1.1.0 Build 20230725 Rel. 55602(5553)

Hello,

 

I was trying to set up an AX23 v1.20 with an RE315 via Ethernet Backhaul but the connection keeps on going Wireless Backhaul. Firmware on the AX23 and RE315 should support it according to EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW - Home Network Community, as well as here TP-Link EasyMesh Devices.

 

Firmware on the RE315 was updated to 1.0.30 Build 230919 which is the supported version.

 

From what I have seen around, it might be a hardware version issue, although other regions (EU) do have support on their firmware for it. It would be a shame if that's the case.

 

Thank you in advance.

  0      
 
  0      
 
#1
Options
7 Reply
Re:AX23 v1.2 and RE315 not connecting via Ethernet Backhaul EasyMesh
2024-10-24 22:13:43

  @DieGar 

 

The RE315 region should not be a problem - check this post.

When the ethernet connection is unplugged the ethernet backhaul falls back to a wireless backhaul so try with another ethernet cable.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#2
Options
Re:AX23 v1.2 and RE315 not connecting via Ethernet Backhaul EasyMesh
2024-10-24 22:43:15

  @terziyski 

 

Thanks for answering! I was actually referring to the region of the AX23 main router. 

 

Tested different cables, no change. Also tried different ports on the AX23 just in case it was an issue there, no change either. It keeps on pairing wirelessly instead of via ethernet, which is why I assumed it was related to the main router instead. Other regions list their firmware under the support page for the AX23 and list the Ethernet Backhaul addition, but for the US version, it seems to be only via web through the router itself and won't actually list any release notes on the main support page.

 

 

 

  0  
  0  
#3
Options
Re:AX23 v1.2 and RE315 not connecting via Ethernet Backhaul EasyMesh
2024-10-24 22:43:21

  @terziyski 

 

Thanks for answering! I was actually referring to the region of the AX23 main router. 

 

Tested different cables, no change. Also tried different ports on the AX23 just in case it was an issue there, no change either. It keeps on pairing wirelessly instead of via ethernet, which is why I assumed it was related to the main router instead. Other regions list their firmware under the support page for the AX23 and list the Ethernet Backhaul addition, but for the US version, it seems to be only via web through the router itself and won't actually list any release notes on the main support page.

 

 

 

  0  
  0  
#4
Options
Re:AX23 v1.2 and RE315 not connecting via Ethernet Backhaul EasyMesh
2024-10-25 08:10:33

  @DieGar 

Hi,

 

Please use another wired device like your computer to test if the Ethernet ports on Archer AX23 and RE315 are working normally.

Besides, did you connect the RE315 directly to Archer AX23? Is there any switch in between?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#5
Options
Re:AX23 v1.2 and RE315 not connecting via Ethernet Backhaul EasyMesh
2024-10-25 12:41:20

  @DieGar 

 

Some regional support websites are not updated regularly.

This is from Argentina support portal (this FW is for the US region):

 

 

So AX23 FW should not be the culprit in this case.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#6
Options
Re:AX23 v1.2 and RE315 not connecting via Ethernet Backhaul EasyMesh
2024-10-25 13:32:22

  @Sunshine 

 

Yes, other ports on the AX23 were tested and confirmed to be working. The RE315 is going to be behind a switch, but I also tested plugging it directly to the AX23 to rule that out. Also tested the ports on the AX23 with a laptop directly and everything works as intended.

 

If I switch the operating mode of the RE315 to Access Point instead, it detects the Ethernet connection just fine and works without issues. It's only when it comes to detecting the Ethernet Backhaul that becomes a problem. 

  0  
  0  
#7
Options
Re:AX23 v1.2 and RE315 not connecting via Ethernet Backhaul EasyMesh
2024-10-28 03:45:59

Thank @terziyski  for helping to confirm the information.

 

@DieGar Thanks for your update.

I've created a support ticket via your registered email address, and escalated it to our support engineer to look into the issue. The ticket ID is TKID241061062. Please check your mailbox.

 

If the issue is addressed or solved, welcome to update this topic thread with your solution to help others.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#8
Options

Information

Helpful: 0

Views: 382

Replies: 7

Tags

EasyMesh Ethernet Backhaul OneMesh EasyMesh Network Connectivity
Related Articles
AX23 and EAP225
536 0
How to set up WDS on AX23?
416 0
Which OneMesh extender(s) is compatible with Archer AX23 / AX1800?
1244 0
Tp-Link AX1800 (AX23?) and RE330 Easymesh not working at all
1317 0
Ax20 v3 and Ax23 easy mesh ethernet backhaul setup?
1442 0
Archer AX23/AX1800, mesh system with PoE and Ethernet backhaul
889 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.