I bought two BE800 routers and installed one as the main router and the other as a satellite (easymesh). 

This works really well, except for a small and annoying detail: the satellite's led is default (many different images rotating) and the main router only has a clock as i intended.

I also only want a clock for the satellite. The satellite cannot be controlled regarding the LED and it should automatically be in the same LED setting as the main router. But it isn't.

I reset the satellite and installed it independently, added to the tether and changed the led light to a clock. Worked well.

I installed it back as a satellite and the led light changed from the clock (which is also in the main router) back to rotating images (coffee cup, musical note, etc.)

So I am in a situation where the LED lights on the satellite do not work as they should. From the control of the main router and the tehter application, I can turn off the LED so that it also turns off on the satellite, but the brightness and images can only be adjusted for the main router.