EasyMesh backhaul connection vs Guest and IoT wifi networks
Hi,
is there a way to configure Easymesh with two C64 routers to work with Guest and IoT wifi as well as with main wifi? Main wifi seems to work with EasyMesh backhaul just fine but rest of network are not extended.
Thanks for reply
Kind regards
Lukas
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Currently the guest network and IoT network are not available on EasyMesh satellite routers, we have reported it to development team for evaluation to add it in the furture, once there is any update, we will inform users on the community.
- Copy Link
- Report Inappropriate Content
Currently the guest network and IoT network are not available on EasyMesh satellite routers, we have reported it to development team for evaluation to add it in the furture, once there is any update, we will inform users on the community.
- Copy Link
- Report Inappropriate Content
@Sunshine Thanks a lot for reply, I really hope it will be solved soon. EasyMesh is quite unusable this way, sadly.
- Copy Link
- Report Inappropriate Content
Thanks for the update on this issue, I have 3 AX72s (wired easymesh backhaul) and would love IOT and Guest networks to be available across the mesh network, as it would mean IOT could be used near any of the points.
Thanks
- Copy Link
- Report Inappropriate Content
Yeah...recently I bought new TP-Link routers (BE550 and BE230) to pair them as mesh via ethernet backhaul. It was a quite expensive step, however is 21st century so I need WiFi 7 in my house, because many of my devices can use that new standard of WiFi. Unfortunately, as previously mentioned, the satellite does not provide access to the IoT and guest network which is highly inconvenient because my IoT devices are in my whole house, where I need connect some of them to satellite due to weak signal from main router. I know I can change my routers to Deco, but... 1 - I don't like a design, 2 - they are even more expensive, 3 - I need access for configuration my router via website (not dedicate app). So guys...I kindly ask you to consider making this feature available on a such expensive devices.
Best Regards.
- Copy Link
- Report Inappropriate Content
Hello, we certainly appreciate all your feedback and feature requests here!
While we don't have any specific details that I can share around if this feature can come to all the home routers, or when it might, I'll make sure to log this feature request and pass it along to the team.
It is also suggested to "Start a new thread" in our Feature Request (Routers) block, then maybe more people can vote if they have same model and request as yours.
Thanks for your support and cooperation all the time~
- Copy Link
- Report Inappropriate Content
Thanks for reply Marvin. I will try start new thread as you suggested, anyway it looks like a bit deliberate action, because MLO network magically is shared by satellite, so why IoT and Guest can't be ?
Well...thank you anyway and have nice day.
- Copy Link
- Report Inappropriate Content
Hi, Maybe they have different technical principles and operating logic? MLO network is only supported by WiFi7 routers. Now for all TP-Link wireless routers that support Easymesh, IoT network and guest network can not synchronize to satellite routers.
- Copy Link
- Report Inappropriate Content
@Sunshine easymesh without Share the IoT and Guest makes no sense.... Its unusable...
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1493
Replies: 8
Voters 0
No one has voted for it yet.