TL-WR902AC don't want connect to 5GHz network
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I have a FritzBox 7590 AX with 1200 AX repeater.
The TP-Link router is in Client Mode. When doing a WiFi scan, it only finds 2,4GHz networks and his own 5GHz network.
How can that be? Very strange behavior....
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Try setting your FritzBox 7590 AX 5GHz radio on a wireless channel 36 and test if the TL-WR902AC will see its SSID.
- Copy Link
- Report Inappropriate Content
Try setting your FritzBox 7590 AX 5GHz radio on a wireless channel 36 and test if the TL-WR902AC will see its SSID.
- Copy Link
- Report Inappropriate Content
Yes, this works. But this is not the final solution. If I would set it permanently in my network I would have other problems.
So I have to live with 2,4GHz connection
Thank you!
- Copy Link
- Report Inappropriate Content
The issue is that TL-WR902AC doesn't support DFS channels and if you want to use it in a setup like this, you'll have to avoid these channels on the FritzBox 7590 AX.
- Copy Link
- Report Inappropriate Content
Hi,
I think this one should fulfill your requirements. It supports Client Mode and also DFS channels.
https://www.tp-link.com/en/home-networking/access-point/tl-wa3001/
- Copy Link
- Report Inappropriate Content
@terziyski HI, I purchased a TL-WR902ac, I should replace a client that receives a hidden ESSID in EE802.11a mode (old 5Ghz USA).
I don't know if it uses channel 36 and I don't think it uses DFS channels, do you think this router could work?
Thanks
- Copy Link
- Report Inappropriate Content
According to TL-WR902AC specifications for 5GHz band ( IEEE 802.11ac/n/a 5 GHz ) it should.
Once you've received the device you'll know for sure.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1031
Replies: 6
Voters 0
No one has voted for it yet.