Very low 2.4ghz speeds, 5ghz working properly

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Very low 2.4ghz speeds, 5ghz working properly

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Very low 2.4ghz speeds, 5ghz working properly
Very low 2.4ghz speeds, 5ghz working properly
2021-05-26 14:17:32
Model: Archer AX20  
Hardware Version: V2
Firmware Version:

Hello All, 

 

I'm currently running into a problem where the 2.4Ghz band is not working properly. Sitting right beside the router the speeds on the 2.4Ghz are very poor roughly 1 Mbps where the 5Ghz band is providing the expected speeds of around 50Mbps. 

I understand that the 2.4 ghz band does have lower speeds than 5ghz at shorter ranges but the cap is normally around 100 mbps for 2.4 GHz.

 

I have attempted a reboot and tested this on multiple devices with no improvement.
 

Thanks! 

  0      
  0      
#1
Options
1 Reply
Re:Very low 2.4ghz speeds, 5ghz working properly
2021-05-27 16:52:04

@DoubleMaverick 

 

Here's a simple example of 2.4 GHz settings:

 

It's quite possible that the 2.4 GHz band around you is highly congested. You can check that by installing an app like Wi-Fi Analyzer on your phone or laptop and test:

https://eyenetworks.no/en/locating-good-channels-bad-neighbors-wi-fi-scanner/
What you can do is to set a channel with less congestion according to the test results.

More practical advises: https://www.actiontec.com/wifihelp/wifi-networking/wifi-wednesday-is-wifi-interference-slowing-your-connection/

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 534

Replies: 1

Related Articles