Model :

Hardware Version :

Firmware Version :

ISP :

Hello,

is there a way to disable MAC Binding?

We are little office with 4-5 APs (all APs have same SSID) and we want to use the ac750 (WR-902AC) as mobile Printer Solution.
We configured the AC750 as AP Client mode but we have to enter a MAC Address from one of our APs.
If I enter the MAC, the AC750 will only connect to the WLAN over this AP, but we want to change the position sometimes, and then AP is not in range and we would have to set a different MAC from a different AP.

So disabling MAC Binding would be the perfect. Before we used an old Symbol CB3000 Client Bridge, which doesn't have MAC Binding. But it got broken.

Thx in advance.