TL-WPA4220kit - devices on this cant connect to other devices in same network
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-WPA4220kit - devices on this cant connect to other devices in same network
Model :
Hardware Version : Not Clear
Firmware Version :
ISP :
I have a TL-WPA4220kit and plugged it in and cloned and all seemed to be fine – both have same SSID, password etc I have also checked this via the TP utilities
However as I have starting using more of the devices in the house, a problem has come up
The original router status page shows what is connected to it and shows all devices connected to it via the TP Line as LAN1 – this makes sense as the powerline is plugged in to port 1 of the router and each wireless device connected to the adapter is shown as this port, ie LAN1.
Now the other devices on the network, via cable as say LAN2, LAN3, LAN4 and / or anything directly connected to the router via wifi also show in the router status page
Basically all looks good
But if say a laptop connect via the TP Line (LAN1) tries to print to the wireless printer connected to the original router - it cant see the printer – it shows as off line
Or an iphone connected to the standard router tries to play music over airplay to a device connected to the TP link – again it cant see it
It seems as if both networks are shown on the router status page and all looks good but devices connected via one method (ie TPLink or Router) cant communicate with devices connected via the other method - screen print below shows more info but as example ellas iPhone on LAN1 (TPLink) cant access the device Kitchen (airport express connect to router)
any ideas
Hardware Version : Not Clear
Firmware Version :
ISP :
I have a TL-WPA4220kit and plugged it in and cloned and all seemed to be fine – both have same SSID, password etc I have also checked this via the TP utilities
However as I have starting using more of the devices in the house, a problem has come up
The original router status page shows what is connected to it and shows all devices connected to it via the TP Line as LAN1 – this makes sense as the powerline is plugged in to port 1 of the router and each wireless device connected to the adapter is shown as this port, ie LAN1.
Now the other devices on the network, via cable as say LAN2, LAN3, LAN4 and / or anything directly connected to the router via wifi also show in the router status page
Basically all looks good
But if say a laptop connect via the TP Line (LAN1) tries to print to the wireless printer connected to the original router - it cant see the printer – it shows as off line
Or an iphone connected to the standard router tries to play music over airplay to a device connected to the TP link – again it cant see it
It seems as if both networks are shown on the router status page and all looks good but devices connected via one method (ie TPLink or Router) cant communicate with devices connected via the other method - screen print below shows more info but as example ellas iPhone on LAN1 (TPLink) cant access the device Kitchen (airport express connect to router)
any ideas
File:
router page.PNGDownload