How do I configure TP-LINK router to remote access with a cable modem ?
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How do I configure TP-LINK router to remote access with a cable modem ?
Model :
Hardware Version : Not Clear
Firmware Version :
ISP :
Assuming that we have valid IP (201.xxx) available contracted with the ISP how to configure TL-MR3420 to remote access ?
current below configuration is working with no remote access:
WAN:
Dynamic IP
IP adress 192.168.1.10
Default gateway: 192.168.1.1
DNS server: pri.:201... sec.:201...
LAN:
IP adress: 192.168.0.1
PCs:
IP adress: 192.168.0.x
Gateway: 192.168.0.1
DNS pri: 201...
DNS sec: 201...
LAN needs fixed IPs in each machine -> working OK.
PCs internet access -> working OK.
Hardware Version : Not Clear
Firmware Version :
ISP :
Assuming that we have valid IP (201.xxx) available contracted with the ISP how to configure TL-MR3420 to remote access ?
current below configuration is working with no remote access:
WAN:
Dynamic IP
IP adress 192.168.1.10
Default gateway: 192.168.1.1
DNS server: pri.:201... sec.:201...
LAN:
IP adress: 192.168.0.1
PCs:
IP adress: 192.168.0.x
Gateway: 192.168.0.1
DNS pri: 201...
DNS sec: 201...
LAN needs fixed IPs in each machine -> working OK.
PCs internet access -> working OK.