WR940N Port Forward

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

WR940N Port Forward

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
WR940N Port Forward
WR940N Port Forward
2014-04-27 14:57:05
Region : Argentina

Model : TL-WR1043ND

Hardware Version : V2

Firmware Version :

ISP :


Hey All.

I have a problem with Port Forwarding on my router.

I have a siemens PLC with an web server built in to it. I have connected the plc to the LAN and its ip adress is 192.168.0.1 so i changed the routers ip adress to 192.168.0.2.
When I type in 192.168.0.1 in the browser when on the LAN the PLC webpage works great.

Now I whant to access the web server from the internet.

I have changed the routers remote management port to 8080 and i can access the router from the internet, works great.

Now i have forwarded port 80 and 443 to 192.168.0.1 but I can not get through to the web server? These ports should be the correct ones.

Any suggestions?

Thanks in advance



  0      
  0      
#1
Options
2 Reply
Re:WR940N Port Forward
2014-04-28 02:24:19
Do you have public IP address on WAN port?
  0  
  0  
#2
Options
Re:WR940N Port Forward
2014-04-30 02:36:31
I have a public ip adress and i have got it changed to static ip adress. But when i try to change it to static ind the router it says that it is dynamic?
  0  
  0  
#4
Options