Wifi is on but devices don't connect
Hi i have this device at 3 week and always that i turn off on ac adapter or power goes down, after turn on again, wifi is on but is impossible to connect to wifi in any device. I have to click on reset button once, to turn off wireless, click again to turn on and after that devices can connect to the router. Any solution? Thanks
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, thanks for your further update.
It is suggested to try the solution in the thread below:
Wireless Devices Fail to Connect after Rebooting Archer NX200 Only When 2.4GHz band Works
Best regards.
- Copy Link
- Report Inappropriate Content
@DiogoP SAME HERE!
- Copy Link
- Report Inappropriate Content
Hi, welcome to our community.
May I confirm some information to understand your situation better?
1. How many client devices do you have? What kind of them are they? Please share models if possible.
2. When your wireless devices failed to connect the network, is there any error message? Please share related screenshot if possible.
3. Is there any wired device connected to your NX200 directly? What is it? If you remove it, is is the same issue?
Welcome to share more details if you feel it is necessary.
Thanks and best regards.
- Copy Link
- Report Inappropriate Content
I have 3 devices connected via LAN and 5 connected to the 2.4 GHz Wi-Fi.
The 5 GHz Wi-Fi is disabled.
When Apple devices (iPad, iPhone, etc.) try to reconnect, an error message appears saying incorrect password
Disconnecting the LAN devices makes no difference.
The only solution I've found is to change the router password and then set it back to the previous one. Doing this allows all devices to reconnect automatically without any issues.
- Copy Link
- Report Inappropriate Content
@Marvin_S 4 devices wireless and one via cable. The problems occurs only when i disable 5ghz network. Is 5ghz network is on all works fine even if i turn off 10 times. When i have 5ghz network disable when turn off and on. Wifi is on, but devices does not connect without error message. I have to click on reset button to turn off and on de wifi. And then works, but when is on, with click on button, 5ghz network is on
- Copy Link
- Report Inappropriate Content
Hi, thanks for your further update.
It is suggested to try the solution in the thread below:
Wireless Devices Fail to Connect after Rebooting Archer NX200 Only When 2.4GHz band Works
Best regards.
- Copy Link
- Report Inappropriate Content
Is fixed thanks
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 183
Replies: 6
Voters 0
No one has voted for it yet.