Official Release Archer BE550 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, ECO Mode, and More
This Article applied to:
Archer BE550 V1 1.1.1 Build 20241230
The official version 1.1.1 Build 20241230 brings a range of improvements and new features to enhance your networking experience, offering better performance, security, and ease of use. This update is gradually rolling out, and users can check for updates on the BE550's web interface or through the Tether App and install the latest version. We strongly recommend upgrading to this version to improve the overall experience.
New Features and Modifications:
- Updated the wireless driver to enhance system stability and compatibility.
- Newly supported EasyMesh in AP Mode.
- Newly supported Web UI in EasyMesh Satellite/Agent mode, offering convenient control options such as LED Control, Reboot, Firmware Upgrade, and more.
- Newly supported DoH/DoT.
- Newly supported ECO Mode.
- Newly supported setting the Wi-Fi Schedule separately for different Wi-Fi frequencies.
- Newly supported Multi-selection for the Access Control allow list.
- Newly supported Guest Network Isolation from the main network in AP Mode.
- Newly supported setting the client IP range of the PPTP/L2TP/IPsec VPN server to match the main network's DHCP range.
- Fixed the bug that iPhone 16 Pro fails to connect to the MLO Network when the Access Control allow list was enabled.
- Optimized USB sharing performance.
- Enhanced MLO compatibility.
- Optimized the HomeShield function and traffic recognition with the newly supported DPI function.
Note: Once upgrade to the 1.1.1 version, you cannot downgrade back to the 1.0.x firmware.
Firmware Download:
If you're unable to detect the latest version at this early stage, please download the firmware from the below provided direct link and install it manually on your Archer BE550 V1.
Before the Upgrade
(1) For the sake of insurance, it's always recommended to save a copy of the router Backup Config file before upgrading or downgrading.
(2) This official firmware for Archer BE550 V1 can be applied to all versions (EU/US/JP/TW/etc.).
(3) You may follow the guide to upgrade the firmware of your router. How to Upgrade the Firmware on the TP-Link Wi-Fi Routers.
Direct Firmware Download Link
| Archer BE550_V1&V1.6 | Archer BE550_V1/V1.6_1.1.1_Build 20241230 (Official Firmware) |
Additional Information
As always, we value your feedback. If somehow you encounter an issue during or after the router firmware upgrade, it's suggested to comment below with the following info. Your input helps us continue improving and providing the best products and support.
- Provide a detailed network layout, including how the devices are connected, especially if there are EasyMesh satellite devices.
- Detailed issue description, and provide more information on the specific conditions that seem to trigger the problem.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
snapper1357 wrote
Before the update, the Liftmaster 828LM was connected directly to one of the LAN ports on the back of the BE550. The 828LM was listed as one of the connected clients on the older firmware.
After the update, the 828LM did not get an IP address from the BE550 when directly connected to it (i.e., the green status light on the 828LM does not stay on to indicate successful connection to the Internet). The 828LM is not listed on the connected clients list with the current (1.1.1) firmware.
There is no official documentation from Liftmaster specifying what LAN speed(s) it supports when connecting with the Ethernet cable. When I connect the 828LM on one of my old laptops (Thinkpad T430) with an Ethernet port, Windows 10 specified that the connection speed was 10 mbps. There is a Reddit thread (https://www.reddit.com/r/homeautomation/comments/kbd4j3/828lm_myq_no_longer_connecting/) that reports similar 10 mpbs Ethernet connection when connected to another device.
@snapper1357 Thank you very much for the clarification.
I will also escalate the case to our support engineers for further analysis. Please check your registered email for a follow-up.
- Copy Link
- Report Inappropriate Content
Hello Kevin Thank you very much for the information, I will try this update as soon as possible and share my experience here.
I just want to share one thing I'm curious about. I was able to run speed tests on a few of my old VDSL modems from TP-Link, but I don't see the speed test app on this new router.
In fact, when I log in to the admin on the notebook, when I look at the source code below on the main screen, there is a field for speed test, but it is empty.
I wonder if the software team is planning to add this speed test app to this router?
- Copy Link
- Report Inappropriate Content
Kevin_Z wrote
Ken_Archer wrote
It is the Archer AX3000 Pro. I have it and the BE550 connected to my AT&T gateway BGW320-505. My extenders are the RE815XE and the RE715X. I have turned off EasyMesh and did a full reset of the the AX3000 Pro as well as the extenders.
I have even unplugged the AX3000 pro and the extenders leaving the BE550 the only router running and when I try turning on EasyMesh in AP mode it gives me the message that there is another main router in my EasyMesh network. It asks me if I would like to continue and setup the BE550 as a Satellite router or cancel. If I do try to continue to setup as a Satellite router the process gets to 100% and then just hangs there and never completes. I am forced to do a reset on the BE550 and start over.
This only happens in AP mode. I tried turning on Eashmesh on in Wireless Router mode and it works fine. I am able to connect my extenders with no issues. I would rather run it in AP mode. The issue to me seems like it is a problem with the BE550 thinking there is another Main router on the network.
@Ken_Archer Thank you very much for your detailed information.
What if you try configuring IP Passthrough and DMZplus on the AT&T gateway BGW320-505 and making the BE550 the main router, would that work?
https://www.att.com/support/smallbusiness/article/smb-internet/KM1188700/
If you prefer to make the AT&T gateway BGW320-505 the main router and set the BE550 to AP Mode, I can escalate the case to our support engineers for further analysis. Please let me know how you would like to proceed.
I prefer to keep the BE550 in AP Mode and the AT&T gateway as the main router. Can you please escalate the case to the support engineers.
- Copy Link
- Report Inappropriate Content
Ken_Archer wrote
Kevin_Z wrote
@Ken_Archer Thank you very much for your detailed information.
What if you try configuring IP Passthrough and DMZplus on the AT&T gateway BGW320-505 and making the BE550 the main router, would that work?
https://www.att.com/support/smallbusiness/article/smb-internet/KM1188700/
If you prefer to make the AT&T gateway BGW320-505 the main router and set the BE550 to AP Mode, I can escalate the case to our support engineers for further analysis. Please let me know how you would like to proceed.
I prefer to keep the BE550 in AP Mode and the AT&T gateway as the main router. Can you please escalate the case to the support engineers.
@Ken_Archer Sure. Will do.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 5
Views: 1223
Replies: 24
Voters 1