@Kevin_Z So I turned off device and turned back on. And still negative feedback after latest update to v.1.1.1. Router goes like disconnecting or restarting self. This happen so often after latest update.

P.S. I want to see logs and #TF. I can't see, because when router reboots self logs are deleted. And I can't see what is issue why router reboots self. Now is so annoying every two minutes router reboots self. Chat support doesn't work. Phone support up to GBP0.55 per minute.

  @INTRASERVERNET 

My BE550 has been running wonderfully and without any problems since the update. Only when the ECO mode is activated do I experience stuttering for a very short time or the wireless connection is lost for a short time when the 2.4GHz wireless network is switched off. The latter is probably because the entire wireless restarts when just one wireless frequency is switched off.

Have you already tried a complete reset to factory settings and then a reconfiguration?

Ok, I'll look what I can do. Reset device and reconfigure. But absolutely this is nightmare. No Eco Mode isn't enabled. I have set on normal.

UPDATE! | I found what couses router unstability. I turned off all devices and I turned on one by one and let to work for 20min, till started rebooting. And fortunately I found quickly. It is Nokia Streaming Box 8000. On both connection it couses reboot, wifi, ethernet. I don't know why. I have connected as well MAG254 for IPTV and no issues.

  @Kevin_Z 

Kevin_Z wrote

This Article applied to:

Archer BE550 V1 1.1.1 Build 20241230

 

The official version 1.1.1 Build 20241230 brings a range of improvements and new features to enhance your networking experience, offering better performance, security, and ease of use. This update is gradually rolling out, and users can check for updates on the BE550's web interface or through the Tether App and install the latest version. We strongly recommend upgrading to this version to improve the overall experience.

 

New Features and Modifications:

• Updated the wireless driver to enhance system stability and compatibility.
• Newly supported EasyMesh in AP Mode.
• Newly supported Web UI in EasyMesh Satellite/Agent mode, offering convenient control options such as LED Control, Reboot, Firmware Upgrade, and more.
• Newly supported DoH/DoT.
• Newly supported ECO Mode.
• Newly supported setting the Wi-Fi Schedule separately for different Wi-Fi frequencies.
• Newly supported Multi-selection for the Access Control allow list.
• Newly supported Guest Network Isolation from the main network in AP Mode.
• Newly supported setting the client IP range of the PPTP/L2TP/IPsec VPN server to match the main network's DHCP range.
• Fixed the bug that iPhone 16 Pro fails to connect to the MLO Network when the Access Control allow list was enabled.
• Optimized USB sharing performance.
• Enhanced MLO compatibility.
• Optimized the HomeShield function and traffic recognition with the newly supported DPI function.

 

Note: Once upgrade to the 1.1.1 version, you cannot downgrade back to the 1.0.x firmware.

 

Firmware Download:

If you're unable to detect the latest version at this early stage, please download the firmware from the below provided direct link and install it manually on your Archer BE550 V1.

 

Before the Upgrade

(1) For the sake of insurance, it's always recommended to save a copy of the router Backup Config file before upgrading or downgrading.

(2) This official firmware for Archer BE550 V1 can be applied to all versions (EU/US/JP/TW/etc.).

(3) You may follow the guide to upgrade the firmware of your router. How to Upgrade the Firmware on the TP-Link Wi-Fi Routers.

 

Direct Firmware Download Link

Archer BE550_V1&V1.6

Archer BE550_V1/V1.6_1.1.1_Build 20241230 (Official Firmware)

 

Additional Information

As always, we value your feedback. If somehow you encounter an issue during or after the router firmware upgrade, it's suggested to comment below with the following info. Your input helps us continue improving and providing the best products and support.

• Provide a detailed network layout, including how the devices are connected, especially if there are EasyMesh satellite devices.
• Detailed issue description, and provide more information on the specific conditions that seem to trigger the problem.

Ok, TP-Link support sent me (service (prerelease)) firmware, I'll going to try now. Does it fix or not.

UPDATE. Works perfect no reboots yet.

INTRASERVERNET wrote

Ok, TP-Link support sent me (service (prerelease)) firmware, I'll going to try now. Does it fix or not.

UPDATE. Works perfect no reboots yet.

That sounds very good.

What is the release and build number of the firmware and are there any other obvious changes or updates in the firmware?

  @GrenSo firmware version: 1.1.1 Build 20241230 rel.20267(4555), I don't anything new or different.

  @INTRASERVERNET The one you were sent is this the Beta firmware thats available on the first page of this forum? looks the same.