Need help - to connection Speed 100Mbps to 1000Mbps
First setup by app it shows me "Your Ethernet cable connected to the WAN port does not support gigabit speeds. Please use an RJ45 CAT 5e/6/7/8 Ethernet cable"
I have used the cable (CAT5e) whice is given in box with router. And I am using HG8310M - model ONU.
It shows 100Mbps. Help me to connect gigabyte (1000Mbps) speed.
Please help me.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @S_R_Pavel，
Auto-negotiation allows a port on a router to communicate with the wired device to determine the optimal duplex mode and speed for the connection.
To enable the Auto-Negotiation on the internet port, Please log into your router's web management page by visiting: https://tplinkwifi.net
Then go to Advanced->Internet-> Internet Port Negotiation Speed Setting and select "Auto-Negotiation". You can also set the port to "1000Mbps Full Duplex" or "100Mbps Full Duplex".
As the error message suggests, you can also try to replace it with another cat5e/6 cable. It is recommended that you buy it from a regular store because some cables may be of poor quality and cause negotiation anomalies.
- Copy Link
- Report Inappropriate Content
Hi @S_R_Pavel，
Auto-negotiation allows a port on a router to communicate with the wired device to determine the optimal duplex mode and speed for the connection.
To enable the Auto-Negotiation on the internet port, Please log into your router's web management page by visiting: https://tplinkwifi.net
Then go to Advanced->Internet-> Internet Port Negotiation Speed Setting and select "Auto-Negotiation". You can also set the port to "1000Mbps Full Duplex" or "100Mbps Full Duplex".
As the error message suggests, you can also try to replace it with another cat5e/6 cable. It is recommended that you buy it from a regular store because some cables may be of poor quality and cause negotiation anomalies.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 146
Replies: 1
Voters 0
No one has voted for it yet.