Home

Forums

Stories

Knowledge Base

Home Network Community > DSL Modem Routers > TD-W9960 bandwidth control error with lan port

< DSL Modem Routers

TD-W9960 bandwidth control error with lan port

TD-W9960 bandwidth control error with lan port

TD-W9960 bandwidth control error with lan port

2 weeks ago

Posts: 5

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-03-20

TD-W9960 bandwidth control error with lan port

2 weeks ago

Tags:

Model: TD-W9960

Hardware Version: V1

Firmware Version: 1.5.0 0.8.0 v009d.0 Build 230705 Rel.45626n

I use td-w9960 and bandwidth control do not work well on lan port. i have to connect cable to the modem say on lan 1 then disable and re-enable bandwidth control fn. and to use lan 2 on another device i have to disable and re-enable bandwidth control fn. AGAIN. I'VE TO DO THAT EVERY TIME MODEM RESTARTS. it's really annoying.

i'm using address reservation and bandwidth control using IPs.

0

0

#1

2 Reply

2 weeks ago

Posts: 2183

Helpful: 159

Solutions: 380

Stories: 0

Registered: 2022-05-09

Re:TD-W9960 bandwidth control error with lan port

2 weeks ago

Hi, welcome to our community.

Do you mean the bandwidth control feature can not work properly on your wired devices? Can you share more details about the problem?

You may refer to the guide to check your settings.

It is also suggested to contact local support for direct help.

Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode.

0

0

#2

LV1

2 weeks ago

Posts: 5

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-03-20

Re:TD-W9960 bandwidth control error with lan port

2 weeks ago

thanks for reply

more details and PICs,
I used LAN2 and rebooted the modem, I found speed limited
then moved the PC's ethernet to LAN1, i found speed NOT limited

i disabled and re-enabled bandwidth control then speed limited

then moved the PC's ethernet to LAN4, i found speed NOT limited and LAN3 as well

and a PIC of log

0

0

#3