Home Network Community > DSL Modem Routers > Archer VR2100v virtual server - no interface to add
< DSL Modem Routers

Archer VR2100v virtual server - no interface to add

Archer VR2100v virtual server - no interface to add

Archer VR2100v virtual server - no interface to add
Archer VR2100v virtual server - no interface to add
2024-11-18 09:19:00 - last edited 2024-11-20 01:45:15
Tags: #Port Forwarding
Model: Archer VR2100v  
Hardware Version: V1
Firmware Version: 1.18.0 0.9.1 v009e.0 Build 241018 Rel.43535n

Hi

 

I'm facing issues when adding new rules to port-forwarding/virtual server. The drop-down field "Interface Name" only gives me the option "No interface":

 

no interface

 

I can fill the other fields but the "Save" button stays always blocked - I assume because of the "No interface".

 

Any hints on how to fix this?

I've already tried restart, different browser, and firmware upgrade (currently on the latest version).

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Archer VR2100v virtual server - no interface to add-Solution
2024-11-19 09:40:11 - last edited 2024-11-20 01:45:15

  @terziyski, I did have interfaces there and I had a fully working internet connection.

 

Anyway, I found another issue later: I couldn't connect to my employer's VPN. The fault was the DS-Lite connection from Vodafone. I then requested Dual-Stack (ipv4 and ipv6) from Vodafone and that fixed the connection issue with the VPN; I can also forward ports now - the problem is resolved.

 

I assume that means port forwarding doesn't work when the router is configured for a DS-Lite connection, as described in this article: https://www.tp-link.com/de/support/faq/2750/.

Would be nice if that article could be updated with a warning stating that port-forwarding will no longer work. Having it in the manual too wouldn't hurt.

Recommended Solution
  1  
  1  
#3
Options
2 Reply
Re:Archer VR2100v virtual server - no interface to add
2024-11-18 23:13:31

  @Dr1T 

 

If you don't have any Internet connection configured here:

 

 

you'll have onlly "No interface" option in this drop-down menu.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#2
Options
Re:Archer VR2100v virtual server - no interface to add-Solution
2024-11-19 09:40:11 - last edited 2024-11-20 01:45:15

  @terziyski, I did have interfaces there and I had a fully working internet connection.

 

Anyway, I found another issue later: I couldn't connect to my employer's VPN. The fault was the DS-Lite connection from Vodafone. I then requested Dual-Stack (ipv4 and ipv6) from Vodafone and that fixed the connection issue with the VPN; I can also forward ports now - the problem is resolved.

 

I assume that means port forwarding doesn't work when the router is configured for a DS-Lite connection, as described in this article: https://www.tp-link.com/de/support/faq/2750/.

Would be nice if that article could be updated with a warning stating that port-forwarding will no longer work. Having it in the manual too wouldn't hurt.

Recommended Solution
  1  
  1  
#3
Options

Information

Helpful: 0

Views: 149

Replies: 2

Tags

Port Forwarding
Related Articles
 Virtual Server cannot be saved on Archer VR2100v
2924 0
VR2100v(DE) interface freezing when trying to access advanced settings
1698 3
Archer VR2100v - What's up with the versioning
2946 0
Archer VR2100v and RE330 address reservation
680 0
 Archer VR2100v Paketverlust
324 0
Mesh Netzwerk mit Archer VR2100v und Archer C80
551 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.