TP-WR841n - one port access to WAN but other only to LAN

TP-WR841n - one port access to WAN but other only to LAN

TP-WR841n - one port access to WAN but other only to LAN
TP-WR841n - one port access to WAN but other only to LAN
Monday
Tags: #Network Connectivity #router configuration
Model: TL-WR841N_EU  
Hardware Version: V10
Firmware Version: OpenWrt Chaos Calmer 15.05.1

Hello,

 

Here is the topology of my network:

- SWITCH_1 via ethernet is connected to

    - the internet router

    - a computer (PC1)

    - the router TL-WR841N

- TL-WR841N via ethernet is connected to:

    - a computer (PC2)

- TL-WR841N via wifi is connected to:

    - a computer (PC3)

 

By default, PC2 and PC3 are on the same subnetwork and can access to internet and to each other but not to PC1.

I want to change the configuration so the PC1 can access to the PC2. I want to keep the config so the PC3 can access to the internet but not to PC1.

 

I tried a lot of thing on the admin panel to do that but i think i don't understand well how to do that.

 

Can you explaine me what should i do ?

 

Thank for your help.

  0      
  0      
#1
Options
3 Reply
Re:TP-WR841n - one port access to WAN but other only to LAN
Monday

  @pioche 

 

If you move PC2  to the Switch_1 where the PC1 is you should be able to achieve this.

But In this topology PC2 and PC3 won't see each other because they won't be on the same subnet anymore.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options
Re:TP-WR841n - one port access to WAN but other only to LAN
Yesterday

  @terziyski I can't do that, PC1 and  PC2 are not on the same floor sad

  0  
  0  
#3
Options
Re:TP-WR841n - one port access to WAN but other only to LAN
Yesterday

  @pioche 

 

With this topology there's no other way to do this except running a cable from PC2 to the Switch_1.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#4
Options