how to Switch back to router mode from access point mode?

how to Switch back to router mode from access point mode?

how to Switch back to router mode from access point mode?
how to Switch back to router mode from access point mode?
2024-09-20 14:39:42 - last edited 2024-09-23 02:35:08
Model: Archer C6  
Hardware Version:
Firmware Version:

how to Switch back to router mode from access point mode?

  0      
  0      
#1
Options
1 Accepted Solution
Re:how to Switch back to router mode from access point mode?-Solution
2024-09-20 17:28:36 - last edited 2024-09-23 02:35:08

  @Ahasan252 

 

Hi,

 

Go to the "Operation Mode" menu. It should be no different than switching from router mode to access point mode.

 

In case you problem is that you are not able to access the Archer C6 in access point mode, because you don't know its IP address, then see if you can find the Archer C6 in the "client list" of the main router to get its IP address.

 

Alternatively, if you don't mind loosing all settings of your Archer C6, you can also reset it to factory default settings by pressing and holding the "Reset" button for about 8 seconds.
 

Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:how to Switch back to router mode from access point mode?-Solution
2024-09-20 17:28:36 - last edited 2024-09-23 02:35:08

  @Ahasan252 

 

Hi,

 

Go to the "Operation Mode" menu. It should be no different than switching from router mode to access point mode.

 

In case you problem is that you are not able to access the Archer C6 in access point mode, because you don't know its IP address, then see if you can find the Archer C6 in the "client list" of the main router to get its IP address.

 

Alternatively, if you don't mind loosing all settings of your Archer C6, you can also reset it to factory default settings by pressing and holding the "Reset" button for about 8 seconds.
 

Recommended Solution
  0  
  0  
#2
Options